Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 24-01-2011, 07:46 PM   #1
creative
I am Batman
 
creative's Avatar
 
Join Date: Jul 2010
Location: Central Coast
Posts: 1,764
Default 2005 fiesta lx

a quick question.

The above car kept shutting down at random times. Both hot and cold temps.

Speedo kept dropping in and out. Battery has been replaced, had the car on the diagnostics and found the speed shaft sensor to be faulty. This was replaced.

so my question is, would the ecu report a fault on the speed sensor and shut the car down? is this sensor used to help determine A/F mixture so if its getting no signal it shuts down to prevent damage?

thanks folks

creative is offline   Reply With Quote Multi-Quote with this Post
Old 24-01-2011, 08:51 PM   #2
Twinpiston
Finally rollin on 20's
 
Twinpiston's Avatar
 
Join Date: Sep 2005
Location: Brisbane
Posts: 1,951
Default

I have heard of similar events resulting from a damaged ECU (a little common according to the UK folk)

Cheers
__________________
Fiesta ST..... Colorado Red...... SOLD
Territory Turbo Ghia ..... Winter White
SOLD - Good bye my little buddy!!!!
K&N, F6 Snorkel, Debung, 20" Enix Turbine in Gunmetal, 7 seat rear springs.
Twinpiston is offline   Reply With Quote Multi-Quote with this Post
Old 26-01-2011, 12:56 PM   #3
creative
I am Batman
 
creative's Avatar
 
Join Date: Jul 2010
Location: Central Coast
Posts: 1,764
Default

Well the symptoms were very similar to when my ecu failed on the ute (heat caused it to cut out) but not knowing if the ecu using the speedo as a measurement to adjust the A/F ratio. it doesnt get that signal, therefore shuts down.

Can anyone confirm this?
creative is offline   Reply With Quote Multi-Quote with this Post
Old 26-01-2011, 01:10 PM   #4
bms
Regular Member
 
Join Date: Jan 2011
Posts: 193
Default

Quote:
Originally Posted by creative
a quick question.

The above car kept shutting down at random times. Both hot and cold temps.

Speedo kept dropping in and out. Battery has been replaced, had the car on the diagnostics and found the speed shaft sensor to be faulty. This was replaced.

so my question is, would the ecu report a fault on the speed sensor and shut the car down? is this sensor used to help determine A/F mixture so if its getting no signal it shuts down to prevent damage?

thanks folks

We have a 2006 Feista and it does the same and I added an extra earth strap which fixed it for a while then came back.
Had my mate check it out and came up with the same faulty speed sensor so have bought a new one but haven't put it in yet as since he diagnoused it, it hasn't done it since

Has yours been good since replacing the speed sensor ?
bms is offline   Reply With Quote Multi-Quote with this Post
Old 03-02-2011, 10:20 PM   #5
creative
I am Batman
 
creative's Avatar
 
Join Date: Jul 2010
Location: Central Coast
Posts: 1,764
Default

just a little update.

since having the sensor replaced the car has been fine. I guess that means it is directly linked to the ecu and caused the shut downs when its was not reading it.
creative is offline   Reply With Quote Multi-Quote with this Post
Old 06-02-2011, 04:38 PM   #6
ads266
Starter Motor
 
Join Date: Sep 2008
Posts: 15
Default Price

How much was the new sensor?
ads266 is offline   Reply With Quote Multi-Quote with this Post
Old 08-02-2011, 12:22 AM   #7
bms
Regular Member
 
Join Date: Jan 2011
Posts: 193
Default

Sensor from ford $150 got mine through a mate for $110 which was gen ford part.
bms is offline   Reply With Quote Multi-Quote with this Post
Old 10-02-2011, 11:52 PM   #8
ads266
Starter Motor
 
Join Date: Sep 2008
Posts: 15
Default

Thanks for that mate.
ads266 is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2011, 12:26 AM   #9
csv8
FF.Com.Au Hardcore
 
csv8's Avatar
 
Join Date: Dec 2004
Location: Central Q..10kms west of Rocky...
Posts: 8,307
Default

How hard to replace ? in case my dies..thanx
__________________
CSGhia
csv8 is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2011, 10:52 PM   #10
bms
Regular Member
 
Join Date: Jan 2011
Posts: 193
Default

Best to have it on a hoist as it at the back sort of half way up the gearbox right near the exhaust so not real easy.
bms is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:20 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL