|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-03-2011, 10:26 AM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2011
Posts: 6
|
im buying a 16 valve twin overhead cam dohc b6t motor in about 3 weeks but the guys blew the box.. will i need to buy a new box or can i use my n/a tx3 siungle overhead cam box.. if not what box can i use and how much will it setme back
|
||
|
|
|
30-03-2011, 03:23 PM
|
#2 | ||
|
Starter Motor
Join Date: Mar 2011
Posts: 5
|
the DOHC turbo boxes are getting really hard to find (even harder in good cond)
Depends on how badly blown the box is might be more worthwhile to be rebuilt. if the casing has blow right out, its a throw away job. if the gearset is buggered you can look into the 626 getsets (from the same years) to fit in. keep looking around, if you find one, take it down a geabox builder and get it reco'd before fitting, too many of them are buggered to put in straight away, unless they can prove to you the box is good. |
||
|
|
|
Please Helppppp Gearbox
Re: Please Helppppp Gearbox
Linear Mode
