|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-07-2011, 01:31 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 796
|
Telstar has a strange problem. Headlight bulb works on high beam, does not work on low beam. Before anybody says "blown low beam", the bulb is a single filament and works for both high and low beam. The other side works fine. no fuses blown, I have not found out yet if there 2 relays/fuses for the individual low beam circuits but I do not think so.
 |
||
|
|
|
16-07-2011, 01:36 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
so you have tested the globe?
|
||
|
|
|
|
16-07-2011, 01:47 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 796
|
The globe serves both low and high beam with a single filament. Works on high beam but not on low beam. Even the harness and plug have only 2 wires/connections. The connector has power on high beam but not on low beam. There are no blown fuses.
|
||
|
|
|
|
16-07-2011, 05:00 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 796
|
Auto electrician at Uralla is an idiot. What he told the previous owners was a load! Trial and error showed me that the outer projectors are the low beam and the inboard lights are high beam. He missed the blown outer bulb. All fixed now.
|
||
|
|
|
|
16-07-2011, 05:43 PM
|
#5 | ||
Join Date: Dec 2004
Posts: 9,292
|
Was going to ask you how you think a single filament can work as both high and low beam as it just isnt possible.
|
||
|
|
|
|
16-07-2011, 06:30 PM
|
#6 | |||
|
All Ford Club Life Member
  
Join Date: Aug 2005
Location: Maryborough .......... All Ford Club of QLD
Posts: 1,590
|
Quote:
Sory wrong BMW do it. My mothers BMW (twin Head lamps) will drop the Hi beam lamp to Low if the (seperate) Lo beam has failed. To still give you a Lo beam on both sides of the car, then switch it back to Hi beam if you turn on your Hi beams.
__________________
 Worked AU XR8 Ute - Toy Std FG XR6T Ute - Daily Supercharged BA 6 Ute - Wife's daily 351W F150 93 XLT 4x4 Supercab |
|||
|
|
|
|
16-07-2011, 09:35 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 796
|
Thanks bundy, saved me the effort. Was not my thinking, auto electrician at Uralla told the people I bought the car off that story. I have not previously owned a series 2 AX TX5 so did not know until I worked it out. The projector low beam headlights threw me as well. I was thinking they were high beam. A workshop repair manual would be good but they are as rare as rocking horse crap or hens teeth.
Last edited by graham7773; 16-07-2011 at 09:36 PM. Reason: language |
||
|
|
|
|
16-07-2011, 10:23 PM
|
#8 | |||
|
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,549
|
Quote:
Or Bi-Xenon lights, has a solenoid to drop the shield for highbeam, goes back up for low beam from a single HID globe on left/right side of the car. Those are different stories, but it is possible 
|
|||
|
|
Ford Telstar
Linear Mode
