|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
20-09-2011, 07:48 AM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2011
Posts: 1,802
|
SURGE TANK
Any body have any basic info for fitting and product to an AU V8 1/4 to 1/2 a tank and she runs out of juice ..corners and take offs mainly.  |
||
|
|
|
20-09-2011, 07:40 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: May 2005
Location: In my shed
Posts: 5,066
|
Turn the pick up 180 degrees.
|
||
|
|
|
|
20-09-2011, 08:21 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2011
Posts: 1,802
|
I rekin your on the money. Maybe instead of sharp left fuel vanishes now it'll be to the right. Just want to do it right once.
__________________
 |
||
|
|
|
|
21-09-2011, 01:25 AM
|
#4 | ||
|
Bugger!
Join Date: Jul 2011
Location: Albany, WA
Posts: 3,307
|
Sounds like the internal baffle's come adrift. You can access your fuel pump through the boot, run the tank empty and pull it out. There should be a white plastic baffle inside the tank. You can either clip it back on or have something fabricated that'll fit through the hole (about 4inch diameter from memory)
__________________
Whoops, there goes another factory setup! Chop and change - butchering cars since 1990 
|
||
|
|
|
|
21-09-2011, 04:42 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2011
Posts: 1,802
|
Do you mean a part of the tank has come apart or fuel pump housing
__________________
|
||
|
|
|
|
21-09-2011, 09:01 AM
|
#6 | ||
|
Bugger!
Join Date: Jul 2011
Location: Albany, WA
Posts: 3,307
|
It clips onto the bottom of the tank, on the inside. It's like a cup that the fuel pump drops inside. When you accelerate or go round corners, it holds fuel up to the pump.
The fuel pump pick up is located about half an inch off the bottom of the tank and points straight down. If you're getting fuel slosh off a half full tank, a) You're going round corners far too hard  ; and b) that would suggest the internal baffling isn't there......Or the tank could be full of crap and the pump picks it up when you slosh it around.
__________________
Whoops, there goes another factory setup! Chop and change - butchering cars since 1990
|
||
|
|
|
|
21-09-2011, 09:40 AM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2011
Posts: 1,802
|
Great info thanks
The car has a lot more torque than orig, so wouldn't have been noticable before. I'll get stuck into it Cheers
__________________
|
||
|
|
|
|
22-09-2011, 07:14 PM
|
#8 | |||
|
FG G6ET
Join Date: Dec 2006
Location: Wesside
Posts: 253
|
Quote:
I'm having the same problem...but I only have a standard VCT 6 lol
__________________
2009 FG G6E Turbo |
|||
|
|
|
|
22-09-2011, 08:46 PM
|
#9 | ||
|
Bugger!
Join Date: Jul 2011
Location: Albany, WA
Posts: 3,307
|
No problems, happy to help
__________________
Whoops, there goes another factory setup! Chop and change - butchering cars since 1990
|
||
|
|
|
|
24-09-2011, 05:27 PM
|
#10 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2011
Posts: 1,802
|
Nothin to do so put a new radiator in one car
On a roll so I checked the fuel pump The pump on the right is a spare. Put that in and made sure fitted in snugly into the tray. (is the tray supposed to be loose) seems dodge So far going fine 
__________________
|
||
|
|
|
|
24-09-2011, 10:41 PM
|
#11 | ||
|
Bugger!
Join Date: Jul 2011
Location: Albany, WA
Posts: 3,307
|
The tray shouldn't be very loose. Since it just clips onto a plastic lump, it will wiggle a little, but not a lot (technical answer
)
__________________
Whoops, there goes another factory setup! Chop and change - butchering cars since 1990
|
||
|
|
|
|
24-09-2011, 10:59 PM
|
#12 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2011
Posts: 1,802
|
LOL Couple of scotches..Ain't gonna touch that one
__________________
|
||
|
|
|
|
24-09-2011, 11:04 PM
|
#13 | ||
|
Bugger!
Join Date: Jul 2011
Location: Albany, WA
Posts: 3,307
|
Haha I'm good at thinking. I think a lot. The problem is, most of my thoughts should not be inflicted on the general population
__________________
Whoops, there goes another factory setup! Chop and change - butchering cars since 1990
|
||
|
|
|
|
03-10-2011, 09:58 AM
|
#14 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2011
Posts: 1,802
|
So far so good.
No loss of fuel with low tank of gas. Maybe the splash tray had become dislodged. Made sure it was positioned right into the fuel pump. There is a lump for the splash tray to fit into tank but dodge as. Very happy
__________________
|
||
|
|
|
Surge tank stroker AU
Linear Mode
