|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
23-11-2011, 10:29 PM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2011
Posts: 7
|
i am building a 73 xb fairmont i changed from manual to auto and my tailshaft wont fit the are 28 grooves in the tailshaft yoke i have tryed to research the c4 gearbox but cant find much about them so can someone here tell me how many differant tailshaft yokes are there for the c4 please any help would be
wonderfull as finding parts is hard for these cars |
||
|
|
|
23-11-2011, 10:31 PM
|
#2 | ||
|
Banned
Join Date: Mar 2009
Posts: 688
|
Are you sure it was a C4 and not an FMX?
C4 and manual Yoke is the same . FMX is unique. |
||
|
|
|
|
23-11-2011, 10:34 PM
|
#3 | ||
|
Starter Motor
Join Date: Nov 2011
Posts: 7
|
yes i have two c4 s and they look the same the yoke will go in one of the c4 but when i put the c4 in i picked the one that is differant allway the way murphys law
|
||
|
|
|
|
24-11-2011, 09:48 PM
|
#4 | ||
|
Donating Member
 Join Date: Dec 2004
Location: QLD
Posts: 11,836
 
|
No mate all C4's are same 28 spline from 1964 to the 86
|
||
|
|
|
|
24-11-2011, 10:08 PM
|
#5 | ||
|
Starter Motor
Join Date: Nov 2011
Posts: 7
|
thank you all for your help
but i found the problem i decided to crawl under the car again no mean feat for someone my size got to jack up very high but i pulled the rear seal out and found that the yoke was hitting the gearbox by one mill and so i got the yoke i use for plugging the manual and pushed up a bit was a bit hard but it went in i started the car put in gear looked at the yoke and it was spinning in reverse and drive with no noises that i could hear so ill know on the weekend if i have to change gearboxs ill get a new rear seal and put the tailshaft in |
||
|
|
|
|
24-11-2011, 10:42 PM
|
#6 | ||
|
Regular Member
Join Date: Sep 2007
Posts: 59
|
Good to see you have it sorted man
|
||
|
|
|
ford c4 auto
Linear Mode
