|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
15-11-2005, 01:11 PM
|
#1 | ||
|
Power Wanted
Join Date: Aug 2005
Location: Perth...nice little and secluded
Posts: 17
|
I was just wondering as i have a pod filter in my 88 telstar i was wondering if it would be beneficial at all to perhaps fabvricate some form of air intake pipe that directs cold ari instead of unter the wheel arch, from the front of the car..say running a piece of plastic tube from infront of the pod to behind the grille..has anyone done this b4? if so any help would be good.
Cheers
__________________
88 Telstar Ghia Sedan.....All alpine sound..hu..500w amp..300w 12 inch suub..6x9s custom fitted in front doors...6x9s on parcel shelf...little 4 inch speakers in factory positions in front..Now dropped 1.5 inches..rolling on 16s...need power! |
||
|
|
|
16-11-2005, 10:40 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Canberra
Posts: 13,434
|
What a lot of people do (generically speaking) is buy a spare airbox, cut a hole in it and feed a pipe from the front into it. Then have an aftermarket panel filter. Apparently helps somewhat but I've never done it.
|
||
|
|
|
Air Intake Modifications...
Linear Mode
