|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-03-2012, 03:06 PM
|
#1 | ||
|
Regular Member
Join Date: Feb 2011
Location: Brisbane
Posts: 143
|
Did not know where to post this so I figured this would be a decent place to start. Ive finally finished installing all my audio equipment including JVC headunit, JBL cross overs for the front and OA amp for them. Being the first time i've ever had tweeters i've never known how they sound etc. However they have a constant static distortion sound sound coming from them always.
On higher/mid range volumes I cant hear it but I know its there. Is it just the way my amps tuned at the moment or is this normal operation of tweeters. Many thanks for any advice. -Zak |
||
|
|
|
18-03-2012, 05:21 PM
|
#2 | ||
|
Regular Member
Join Date: Aug 2009
Location: Melbourne, Gladstone Park
Posts: 489
|
You might want to check the grounding. I've grounded my amp to the rear seat bolts.
__________________
Au xr6: tickford kits, tickford 17s, momo T Bar and wheel, leather, lowered on ultra lows, 2.5" cat back with hot dog muffler, K&N panel filter and loving the car as a P plater Future mods: 19" staggered wheels Clear side indicaters. That is all |
||
|
|
|
|
18-03-2012, 07:53 PM
|
#3 | ||
|
The Monty
Join Date: Oct 2007
Location: Geelong
Posts: 1,226
|
did u run the RCA leads and the remote/power wire on seperate sides of the car? i know that is causes static in the speakers when turned up,
Tweeters should be no diffrent to normal 6"/5x7"/6x9" etc only diffrence is its dedicated treble so its a lot crisper sound |
||
|
|
|
|
19-03-2012, 07:41 PM
|
#4 | ||
|
Regular Member
Join Date: Feb 2011
Location: Brisbane
Posts: 143
|
the RCA leads do pass over the main power wire, is it worth starting by moving these around? My ground is on the handbrake lever bracket bolt, a good earth.
Cheers guys. |
||
|
|
|
For those that know their audio
Linear Mode
