|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
05-04-2012, 12:08 PM | #1 | ||
Regular Member
Join Date: Jul 2006
Posts: 105
|
can anyone pplease tell me exactlt where the smartlock module is in my au fairmont???
i think i found the bem, big green module where your left knee is when driving?? ive fitted a smartlock bypass module and need to bypass the starter inhibiter circuit, need to find the two red with dark blue stripe wires at the module connector please can anyone help asap? Regards Dan |
||
06-04-2012, 06:51 AM | #2 | |||
5.6L x 2 pilot
Join Date: Dec 2009
Location: Canbra
Posts: 15,050
|
Quote:
Here is a screen shot from Binary Editor, my tuning Application. Of course, mine is AUII, so I use smartshield, but you can see the switch for the smartlock in the tuning scalars as a function of the ECU. Hope that helps you some. Stu
__________________
2002 AU II LTD 5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust. Quarter Mile: 13.73 @ 105.86mph Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024 2002 XR8 pursuit 250 Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
|
|||
06-04-2012, 07:52 AM | #3 | ||
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
auIILTD is spot on the smartlock is a part of the BEM and the ECU in combination they work together to provide the security. there is a module at the back of the ignition switch but that just sends the security signal to the BEM
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||