|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-04-2012, 12:09 AM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2009
Posts: 28
|
Hey guys need help urgently. changed the trans in my au with another one from
my old au which i know works. we used the torque converter from the old one aswell. gave it a service and put it in. now it does sweet f.... all. put it in reverse and it move ten feet maybe and in drive i got it around the block but no faster than 20kmh as its just slipping. Really could use some help on this one cheers jason
__________________
Current Cars - 82' Twin Turbo RA60 Celica - 82' Hills Weapon RA60 Celica - 82' Stock RA60 Celica - 99' AU1 Futura - 96' EL Fairmont Previous Cars - 11x 82-85 Celicas - RA40 Celica - MX83 Cressida - RT104 Corona - XE Fairmont - XE S-Pack - XF Falcon Manual - Datsun 200b - Camira Wagon - Hyundai Lantra |
||
|
|
|
10-04-2012, 12:11 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2011
Location: Tumut
Posts: 1,632
|
Im going to ask the obvious, how much fluid is in it?
|
||
|
|
|
|
10-04-2012, 08:00 AM
|
#3 | ||
|
Starter Motor
Join Date: Oct 2009
Posts: 28
|
We put oil in it until it came out of the hole on the side. it wAs in the air and even.
Does the oil have to settle then chhseck it again?
__________________
Current Cars - 82' Twin Turbo RA60 Celica - 82' Hills Weapon RA60 Celica - 82' Stock RA60 Celica - 99' AU1 Futura - 96' EL Fairmont Previous Cars - 11x 82-85 Celicas - RA40 Celica - MX83 Cressida - RT104 Corona - XE Fairmont - XE S-Pack - XF Falcon Manual - Datsun 200b - Camira Wagon - Hyundai Lantra |
||
|
|
|
|
10-04-2012, 08:19 AM
|
#4 | |||
|
Au Falcon = Mr Reliable
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
|
Quote:
Yes, fill until it stops running out filler hole, then run through gears, then recheck and top up. Do a search if your stuck, many members have done this job succesfully.You got a workshop manual? cheers,Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792 Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007) |
|||
|
|
|
|
10-04-2012, 10:33 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2006
Location: Western Australia
Posts: 2,195
|
Yes, you can't just fill it with fluid first time around and leave it at that.
You must fill it up initially to full then start and run through gears (standing still) for a few minutes then fill again - might take another 2 litres then no harm in driving around the block a few times and checking (and possibly topping up) a THIRD time... might take another 500ml. That's what I did. |
||
|
|
|
|
10-04-2012, 08:56 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
that's the norm mate, you never get it full with one pan full, you have to keep topping it up after running through the gears engine running.
|
||
|
|
|
|
11-04-2012, 07:20 AM
|
#7 | |||
|
Donating Member
 Join Date: Dec 2004
Location: QLD
Posts: 11,836
|
Quote:
|
|||
|
|
|
au trans changed now wont move
270rwkw BA XR8 
Linear Mode
