Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 23-03-2012, 01:20 PM   #1
oysta
Escort MkII 1977 2.0L
 
Join Date: Feb 2007
Location: Adelaide
Posts: 93
Default Adam's Escort Mk2 '77 Thread

I’ve decided to start an ongoing thread to post work and progress on my Escort.

Car details:
1977 Ford Escort XL Mk2, 4 door, 2.0L
Located inner south, Adelaide


See links for photos





oysta is offline   Reply With Quote Multi-Quote with this Post
Old 23-03-2012, 01:23 PM   #2
oysta
Escort MkII 1977 2.0L
 
Join Date: Feb 2007
Location: Adelaide
Posts: 93
Default Re: Adam's Escort Mk2 '77 Thread

I had previously posted here regarding play in the steering.
The first step was to replace the steering rack mount rubber as it was looking worse for wear. I could see the whole rack move back and forth a few millimetres when turning the wheel.

I was tossing up between super pro and nolathane. I ended up going with nolathane ($30) since it was more readily available at the local shop. I’ve heard that nolathane uses a harder material however for steering rack mount bushes I don’t think this is such a bad thing, should provide better feedback.
TIP: When changing the steering rack mount bushes, go out and buy yourself some longer bolts. The stock ones are too short and you’ll just end up getting frustrated trying to get it back together. I used UNC 5/16” x 1 ½” long, they are imperial so make sure u use 1/2“ spanner or you could round the head. I also put on a second nut to help lock the bolt.

Steering is still not as crisp as I would like so I think the next step will be to change the tie rod ends (with wheel alignment to follow).

This weekend I’ll also bypass the heater as the heater core is leaking. A common problem I think since I had the same on my previous Esky. On that car I changed the whole heater unit with one from a wrecker but this time I think I’ll get the core repaired, there’s no guarantee that second hand replacement units won’t leak too.

Caliper rebuild kit is on the way (from the UK). Also looking for opinions on brake pads. I’ve only used EBC Greens before on Escorts and they are fairly good, especially when warm, but do tend to squeal a bit during first few hundred km’s of bed-in and are quite dusty. I can get the Greens for $85 a pair, anything else to consider in that range?

Busy times ahead...

p.s. what's the best way to post photos. The forum has very limited storage.
Attached Images
File Type: jpg DSC05838 (Small).JPG (42.8 KB, 45 views)
File Type: jpg DSC05844 (Small).JPG (62.0 KB, 46 views)
oysta is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2012, 01:15 PM   #3
oysta
Escort MkII 1977 2.0L
 
Join Date: Feb 2007
Location: Adelaide
Posts: 93
Default Re: Adam's Escort Mk2 '77 Thread

*bump* Any opinions on front brake pads? I can get the Greens for $85 a set, anything else to consider in that range?
oysta is offline   Reply With Quote Multi-Quote with this Post
Old 04-04-2012, 04:46 AM   #4
whooligan
FF.Com.Au Hardcore
 
whooligan's Avatar
 
Join Date: Dec 2005
Posts: 556
Default Re: Adam's Escort Mk2 '77 Thread

I've always used cheap bendix pads for road use. They stop ok and don't squeak like the ones I've just replaced on my RS.
whooligan is offline   Reply With Quote Multi-Quote with this Post
Old 26-04-2012, 12:26 PM   #5
oysta
Escort MkII 1977 2.0L
 
Join Date: Feb 2007
Location: Adelaide
Posts: 93
Default Re: Adam's Escort Mk2 '77 Thread

Quote:
Originally Posted by whooligan
I've always used cheap bendix pads for road use. They stop ok and don't squeak like the ones I've just replaced on my RS.
What brand were the squeeky ones whooligan? If you have just replaced them they may still be bedding in, hence the squeel. From memory, squeel anywhere up to 1000km from new can be expected.
I have gone for some EBC Greenstuff. Should be arriving in the next couple of weeks. Then the caliper rebuild begins!
oysta is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:13 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL