|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-01-2012, 09:33 PM
|
#1 | ||
|
Regular Member
Join Date: Mar 2007
Location: Upper Ferntree Gully
Posts: 136
|
Hi All
Centre rear stop light on a WQ Fiesta - any clues how to change the globe(s)?
__________________
2016 LZ Focus Sport 1.5 turbo petrol
2013 Kuga Titanium 2.0 turbo diesel |
||
|
|
|
16-01-2012, 10:22 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2005
Location: Sausage Singlet NSW
Posts: 3,301
|
Without seeing it at a guess I would say unless there are screws visible on either the face or underside of the light then it must just clip in and will need to be gently pried out to get to the bulb.
|
||
|
|
|
|
17-01-2012, 10:42 AM
|
#3 | |||
|
Quad Cam
Join Date: Aug 2006
Posts: 166
|
Quote:
You need to remove those, and release the two catches accessible through the holes to release the light unit from the tailgate. |
|||
|
|
|
|
18-01-2012, 09:39 AM
|
#4 | ||
|
Regular Member
Join Date: Mar 2007
Location: Upper Ferntree Gully
Posts: 136
|
Thank Guys - appreciate the assistance
__________________
2016 LZ Focus Sport 1.5 turbo petrol
2013 Kuga Titanium 2.0 turbo diesel |
||
|
|
|
|
10-07-2012, 09:33 PM
|
#5 | ||
|
Starter Motor
Join Date: Jan 2012
Posts: 1
|
Howdy. Forum noob, so please forgive the bump.
I have the same issue on the 2007 model. I've taken out the rubber grommets and I can see and release the clips, but the light still stays in place. It's almost as if there is some adhesive in the centre and it won't undo. I'm also wary of the fact that the hose for the rear wiper water jet goes through that plastic light housing so I don't want to force it too hard. Any other hints for this particular model ? Any advice really appreciated. Thanks. |
||
|
|
|
Centre rear stop light
Linear Mode
