|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
13-12-2005, 05:32 PM
|
#1 | ||
|
Tickford Equiped
Join Date: Jan 2005
Location: Tweed Coast
Posts: 418
|
Hey guys,
Can anyone tell me how to pull apart an AU Cluster. I have got it out, got the Front clear lense and black surround off. Now im just left with the white rear part of the cluster and the actual face in it. can these be separated, there were two screws on either side of the Odometer that i removed but it wont budge, Nothing seems to be connected to the rear white part (If you know what i mean) but it wont come out. Is there a special way to get it out. Cheers
__________________
Genuine Tickford Equiped 1998 AU Fairmont Mods: ....... Dash mat & Air Freshener, does that count as a mod?????? Sports Exahust, Tickford Intake Snorkle, K&N Filter, NGK Plugs, Top Gun Leads TS50 Front Bar with Fog lights, TS50 Rear Bar. Injected LPG System, |
||
|
|
|
14-12-2005, 12:11 AM
|
#2 | ||
|
Silhouette AU1 TS50.
Join Date: Dec 2004
Location: Radiator Springs, Victoria.
Posts: 2,135
|
You have to remove the needles, and then the black background (which is lightly glued on). Behind it you will find screws to dismantle it further, if this is what you want to do.
Be careful removing the needles. Easy to break, and if you scratch the black background, the scratches will show at night. Why are you wanting to diamantle it this far? Is there a problem or you just replacing the face/background?
__________________
"People can have the Model T in any colour.. so long as it's black." HENRY FORD (30/07/1863 - 07/04/1947) PIC'S OF MY T1 TS50.
|
||
|
|
|
|
14-12-2005, 04:41 PM
|
#3 | ||
|
Banned
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
|
And you have to be even more careful putting the needles back on. I've seen several that people have done themselves in which the oil guage(?) no longer reads the correct setting (if it in fact moves at all). Seen it happen to the temp and fuel guage as well and also the calibration of tacho and speedo needles is very hard to reset exactly. Be warned - remove the needles at your own peril
|
||
|
|
|
|
14-12-2005, 09:54 PM
|
#4 | ||
|
Boost Addict
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
|
i removed my cluster myself to put a white dash in, i took my time removing the needles and putting them back together. i put a dot of whiteout on the needle and so i can put the needles back into the same position. my speedo was out even beforehand due to diff gears, but it all works just fine. But as said be very careful as u can break them very easily.
__________________
N12 Pulsar - sold Gen1 Liberty Turbo - sold VP Commodore Turbo - sold LN65 Hilux Turbo - sold EL31 Corolla Turbo - sold Ford AU Ute Turbo - sold Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build) Ford BA XR6T Ute - daily driver Ford FG XR6T Sedan - cruiser do you see a general trend? I DO  Can't live with it, can't live without it! |
||
|
|
|
Pulling Apart An AU Fairmont Cluster
Linear Mode
