|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-01-2013, 06:19 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2013
Posts: 12
|
i am getting a rubbing noise on right rear when i put foot on brake it also stays there for a few seconds after moving again.
wayne |
||
|
|
|
07-01-2013, 08:57 AM
|
#2 | ||
|
5.6L x 2 pilot
  
Join Date: Dec 2009
Location: Canbra
Posts: 15,050
 
|
My guess Wayne would be your rear brake pads need replacing. You will also need to get your rear disks machined if possible, but more likely replaced. The rubbing you are hearing is most likely the metal frame of the brake pad rubbing on the disk. This genereally renders your disks as useless - generally throw aways because of the metal on metal damage.
Get it checked asap. Stu
__________________
2002 AU II LTD 5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust. Quarter Mile: 13.73 @ 105.86mph Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024  2002 XR8 pursuit 250 Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
|
||
|
|
|
| This user likes this post: |
|
07-01-2013, 10:48 AM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2007
Location: Brighton, Adelaide
Posts: 3,972
|
+1,
definately check it out asap. also with the noise hanging on for a second or so after you have used the brakes. it possibly has sticky caliper slides? or the disc pads might not be moving freely in the calipers too?
__________________
Money Talks, but all i ever hear is it saying Goodbye!! |
||
|
|
|
brakes
Linear Mode
