|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
20-11-2012, 10:57 AM | #1 | ||
Regular Member
Join Date: Jun 2012
Posts: 244
|
A bit of confusion going on here. I seem to have a 26 mm hex head on my MA TDCi and Nev has a 27 mm. Are there 2 different sizes? I am using a single hex 26 mm for mine. Are the MB and MC any different again?
|
||
20-11-2012, 11:42 AM | #2 | ||
Regular Member
Join Date: Jul 2012
Posts: 179
|
27mm single hex fit perfectly. Plus a long extension bar to get it onto the thing.
8mm Allen Key for the sump plug. I tried the 26mm and it could be jammed on in an emergency but was causing damage. The Filter clips to the lid which is nice as you can flip it upside down as you pull it out to stop drips. Although it is a cause for oily fingers when freeing it from the lid. |
||
11-03-2013, 06:28 PM | #3 | ||
Starter Motor
Join Date: Apr 2012
Posts: 19
|
Pushing this one to the top!.. I have an MB if that helps.
PLanning on doing the first oil change tomorrow |
||
13-03-2013, 08:08 PM | #4 | ||
Regular Member
Join Date: Jun 2012
Posts: 244
|
what size is the hex on your filter?
|
||
13-03-2013, 09:25 PM | #5 | ||
Starter Motor
Join Date: Apr 2012
Posts: 19
|
Its definitely a 27mm
|
||