Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Site Sponsor Forums - In Alphabetical Order > Blue Power Racing Developments

Blue Power Racing Developments The home of Blue Power. Website Link

Reply
 
Thread Tools Display Modes
Old 14-03-2013, 07:53 PM   #1
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,549
Default Tune for E Series Falcons?

Hey guys, just curious if you do tuning on E series Falcons, in particular with the TI Performance J3 tuning stuff?

I've got an EL Fairmont Ghia with:

Pacemaker 4499s
High flow cat
2.5" cat back exhaust
ported/polished head
cammed
stiffer valve springs

and I'm running slightly higher compression with a decked head and AU Falcon head gasket.

I'm looking to get it tuned for 98.

Would I get any benefits out of a tune on these modifications?

Thanks much.

Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 15-03-2013, 03:53 PM   #2
Road Games
Guest
 
Road Games's Avatar
 
Join Date: Feb 2007
Location: Gods Country
Posts: 16,258
Technical Contributor: For members who share their technical expertise. - Issue reason: Replacement. 
Default Re: Tune for E Series Falcons?

From the archive's Damo.

http://www.fordforums.com.au/showthread.php?t=70949
Road Games is offline   Reply With Quote Multi-Quote with this Post
Old 15-03-2013, 06:38 PM   #3
Sorted
OzEcruisers PRESIDENT
 
Sorted's Avatar
 
Join Date: Mar 2005
Location: Melbz
Posts: 15,761
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: For all the contributions you make to the AFF community. 
Default Re: Tune for E Series Falcons?

You will always see improvement with a dyno tune over the stock ecu after you have done the mods you have done

The ti performance or moates j3 chips are very capable of helping you car to peform at it's maximum potential.

If your not sure about a dyno tune get it on a dyno for a few runs to see what the afr's are doing - if they run lean or too rich at any rpm then a dyno tune will benefit the performance of your car
__________________
1994 Ford Fairmont EF NA 6cyl Man 3.9 diff Sedan
PROEF 13.46 @ 105.78mph

Tuned by DYNOMOTIVE

200BUX - AFF Drag Nats 2019 EF Wagon
Quote:
Originally Posted by rednose View Post
Common knowledge that the more weight you take out of the car the less power you need to run the time.
Sorted is offline   Reply With Quote Multi-Quote with this Post
Old 16-03-2013, 11:54 AM   #4
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,549
Default Re: Tune for E Series Falcons?

Quote:
Originally Posted by Bluepower Rocks View Post
Thanks mate, only SCT tunes?

Quote:
Originally Posted by Sorted View Post
You will always see improvement with a dyno tune over the stock ecu after you have done the mods you have done

The ti performance or moates j3 chips are very capable of helping you car to peform at it's maximum potential.

If your not sure about a dyno tune get it on a dyno for a few runs to see what the afr's are doing - if they run lean or too rich at any rpm then a dyno tune will benefit the performance of your car
I like the idea of the TI Performance J3 because they can now control transmission, they can alter how hard it shifts depending on how hard you are on the accelerator, which I like the idea of, because these 4 speeds are hopeless, it drives nicely potting about, but put your foot into it, and it thinks for a few seconds before doing something.

I'll get it done anyway because I've got a few niggly issues and I've gone this far, its not a good idea to do this stuff half assed.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 08:25 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL