Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 23-03-2013, 06:25 PM   #1
ROOSTA
DFDFDF
 
ROOSTA's Avatar
 
Join Date: Jan 2005
Location: Albury-Wodonga
Posts: 2,384
Default Some help identifying some connectors..

Hey guys,

Any one able to help me out with identify what these connectors are and what should plug into them?

They are the last ones I need to work out.. One of them I am sure is for the indicator stalk, but the stalk I have doesnt fit any of them.. :-S







Cheers,
Nik

ROOSTA is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2013, 01:29 AM   #2
EvilChief
Boost Addict
 
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
Default Re: Some help identifying some connectors..

are the underneath the drivers dash part?

even thou I was under my dash 2 days ago I cant say which ne is which but I could a,most swear i have seen them. One loos like for the controls for steering wheel column, and another one for the fuse panel.
__________________
N12 Pulsar - sold
Gen1 Liberty Turbo - sold
VP Commodore Turbo - sold
LN65 Hilux Turbo - sold
EL31 Corolla Turbo - sold
Ford AU Ute Turbo - sold
Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build)
Ford BA XR6T Ute - daily driver
Ford FG XR6T Sedan - cruiser

do you see a general trend? I DO

Can't live with it, can't live without it!
EvilChief is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2013, 10:16 AM   #3
ROOSTA
DFDFDF
 
ROOSTA's Avatar
 
Join Date: Jan 2005
Location: Albury-Wodonga
Posts: 2,384
Default Re: Some help identifying some connectors..

Yer the orange and black ones are under the dash near steering column and the blue one is under the dash near the radio panel...

The indicator stalk I have has a similar connector but it doesnt fit either of these... :-S

Cheers,
Nik
ROOSTA is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2013, 11:32 AM   #4
auIILTD
5.6L x 2 pilot
Donating Member2
 
auIILTD's Avatar
 
Join Date: Dec 2009
Location: Canbra
Posts: 15,039
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For the effort put into the Australia day cruise to Albury Tech Writer: Recognition for the technical writers of AFF - Issue reason: AU Tech article. 
Default Re: Some help identifying some connectors..

Roosta, see if these connector diagrams help.
http://fordforums.com.au/wsm/wire/aubx/Part%2024-3.html

The wiring diagram pages also show the location of the connectors. Good luck.

Stu
__________________
2002 AU II LTD

5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust.

Quarter Mile: 13.73 @ 105.86mph


Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024

2002 XR8 pursuit 250

Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
auIILTD is online now   Reply With Quote Multi-Quote with this Post
Old 24-03-2013, 04:11 PM   #5
ROOSTA
DFDFDF
 
ROOSTA's Avatar
 
Join Date: Jan 2005
Location: Albury-Wodonga
Posts: 2,384
Default Re: Some help identifying some connectors..

Thanks Stu..

Yer had been through all of them but after half an hour of having my head tilted it started to get sore, and seeing as i couldn't download it and print it I gave up using the tech resource...

Cheers,
Nik
ROOSTA is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2013, 04:20 PM   #6
FAT245
Lacking Imagination
 
FAT245's Avatar
 
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
Technical Contributor: For members who share their technical expertise. - Issue reason: Nath deserve's a Technical Contributor award for his willingness to share everything in his vast knowledge of tuning EEC-IV and -V Falcons, not to mention engines! 
Default Re: Some help identifying some connectors..

Okay.

Orange appears to be C-33, which judging by this pic, is for driverside around steering coloumn.



the Black and blue (C-189) is for the airbag module which sits infront of the shifter




and the black one looks to be (C-198) .. which i cannot find atm..
__________________


My 11 Second AU Fairlane
364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W

Last edited by FAT245; 24-03-2013 at 04:44 PM.
FAT245 is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2013, 04:41 PM   #7
FAT245
Lacking Imagination
 
FAT245's Avatar
 
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
Technical Contributor: For members who share their technical expertise. - Issue reason: Nath deserve's a Technical Contributor award for his willingness to share everything in his vast knowledge of tuning EEC-IV and -V Falcons, not to mention engines! 
Default Re: Some help identifying some connectors..

C-198



Looks to be for the heaterbox?
__________________


My 11 Second AU Fairlane
364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W
FAT245 is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2013, 06:25 PM   #8
ROOSTA
DFDFDF
 
ROOSTA's Avatar
 
Join Date: Jan 2005
Location: Albury-Wodonga
Posts: 2,384
Default Re: Some help identifying some connectors..

Hey Nathan,

Thanks mate..

I'll pay you credit for the Orange and the Blue.. But the black one is also located under the steering column, and the heaterbox one is accounted for.. I am think C-158 might be the black one but until I colour match the wires in the back of it I guess I wont know..

And the 'column switch connector' c-167 matches the indicator stalk i have..

What I do know is the 'AU' Indicator stalk I have been given aint plugging into the loom I have.. :-(

I totally should have just bought a full car to utilise... Might still have into look at that..

Cheers,
Nik
ROOSTA is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2013, 06:27 PM   #9
FAT245
Lacking Imagination
 
FAT245's Avatar
 
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
Technical Contributor: For members who share their technical expertise. - Issue reason: Nath deserve's a Technical Contributor award for his willingness to share everything in his vast knowledge of tuning EEC-IV and -V Falcons, not to mention engines! 
Default Re: Some help identifying some connectors..

My coloumn has two connectors underneath, which i think runs upto that connector... not sure exactly but it there might be an intermediate cable?
__________________


My 11 Second AU Fairlane
364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W
FAT245 is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2013, 06:33 PM   #10
ROOSTA
DFDFDF
 
ROOSTA's Avatar
 
Join Date: Jan 2005
Location: Albury-Wodonga
Posts: 2,384
Default Re: Some help identifying some connectors..

Hmm.. Will have to check it out on an actual car..

Also in the tech resources it doesnt list what series AU the connector diagrams and wiring diagrams are for..

Should I take that as series 1, 2 and 3 are the same loom, but with different accessories attached?

Cheers,
Nik
ROOSTA is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2013, 06:34 PM   #11
FAT245
Lacking Imagination
 
FAT245's Avatar
 
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
Technical Contributor: For members who share their technical expertise. - Issue reason: Nath deserve's a Technical Contributor award for his willingness to share everything in his vast knowledge of tuning EEC-IV and -V Falcons, not to mention engines! 
Default Re: Some help identifying some connectors..

the Loom is a S2, So I cannot exactly say.
__________________


My 11 Second AU Fairlane
364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W
FAT245 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:12 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL