|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-04-2013, 08:15 PM
|
#1 | ||
|
Starter Motor
Join Date: Mar 2010
Posts: 15
|
I need help my 5.0 ute wont start just put in a starter motor was not that it just makes a clicking noise help me
|
||
|
|
|
05-04-2013, 08:50 PM
|
#2 | ||
|
Got Ghia?
Join Date: Jul 2006
Location: Perth
Posts: 999
|
Battery ok?
Got a multimeter? Check the battery voltage while cranking then Check for volt drop down the solenoid sw wire as you crank. (probe the sw terminal and a B+ source)
__________________
2007 BF MKII Ghia V8 - BA GT Exhaust| F6 Intake | Superlows | 19" GT-P's | 30mm Swaybar | - Sold  2002 AU2 XR8 Ute - Manual | Leather | Injected LPG | Pacemakers |
||
|
|
|
|
05-04-2013, 09:42 PM
|
#3 | ||
|
Starter Motor
Join Date: Mar 2010
Posts: 15
|
thanks it wont even crank over but it will clutch start tried two batterys
|
||
|
|
|
|
05-04-2013, 09:50 PM
|
#4 | ||
|
Rob
Join Date: Jan 2010
Location: VN Capital
Posts: 1,584
|
the ticking usually means flat battery.. make sure you do the terminals up tight too, just sitting them on there without doing them up won't start.
__________________
99 liquid silver AU Classic -Sold
Supercharged Nissan 350z 280rwkw Blueprint series 3 AU V8 manual |
||
|
|
|
|
05-04-2013, 10:07 PM
|
#5 | ||
|
Starter Motor
Join Date: Mar 2010
Posts: 15
|
yes all are tight I am lost I don't know what is wrong
|
||
|
|
|
|
05-04-2013, 10:11 PM
|
#6 | ||
|
Got Ghia?
Join Date: Jul 2006
Location: Perth
Posts: 999
|
Do you have a multimeter?
If not and you want to confirm it's not the starter (could still be the solenoid wire) look at the solenoid on the starter, there will be the thick B+ cable and another smaller wire attached to the plug on the solenoid. Disconnect this and jump a bit of wire from the b+ connection to this terminal on the solenoid and see if the started engages and cranks. Make sure you hand brake is on and it's not in gear!!!
__________________
2007 BF MKII Ghia V8 - BA GT Exhaust| F6 Intake | Superlows | 19" GT-P's | 30mm Swaybar | - Sold 2002 AU2 XR8 Ute - Manual | Leather | Injected LPG | Pacemakers |
||
|
|
|
| This user likes this post: |
ute wont start start
Linear Mode
