|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-05-2013, 03:47 PM
|
#1 | ||
|
Regular Member
Join Date: Jul 2012
Posts: 179
|
Hi
Maybe i am just silly or not brave enough but, I can't for the life of me remove the front interior light housing. Not even the lens to change the globes... Story: I want to install a dash cam and thought I would poke around up there in search for a permanent power source. This way I don't have to run a cable around to the lighter.. Has anyone attempted to even change the globes? or seen a how to complete with pics? Google is failing me... The manual is no help as it simply says to prise it lose, with a cryptic illustration involving arrows. Well try as i might the best I can achieve is to flop the light cluster forward after releasing a spring clip.
__________________
Mondeo 2011 MC Titanium TDCi. Ink Blue. RIP: Mondeo 2008 MA TDCi. Colorado Red, Leather, Bluetooth, sunroof, Tow pack. C.R. Tech tuning box |
||
|
|
|
05-05-2013, 02:06 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2012
Location: Brisbane
Posts: 504
|
I haven't tried yet, but I have some bulbs on the way so will need to do soon also!
Keep us up to date!
__________________
2016 (MY17) Ford Mondeo Titanium EcoBoost (Moondust Silver)...more power please! |
||
|
|
|
|
05-05-2013, 07:06 PM
|
#3 | ||
|
Regular Member
Join Date: Apr 2008
Location: sydney
Posts: 184
|
I replaced the bulbs in both interior lights with blue leds. (Same with footwell lighting).
From memory I used a flat blade screwdriver to push the retaining clip in to release the front edge of the light unit, then the rear of the unit unclipped from the housing with some "gentle" persuasion. Trickiest part was sliding the led panel into the light unit. This was on MB XR5, not sure if the MA is the same.
__________________
Deep Impact Blue GT manual (EVRTON) Rear spoiler, black OTT, tints, locking nuts, front sensors. |
||
|
|
|
removing the front interior lights
Linear Mode
