|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-09-2013, 04:40 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: May 2008
Location: Darwin
Posts: 1,694
|
Quick thing I'd like to mention regarding some information I found almost impossible to find on the Internet.
A EF/EL Falcon stereo adaptor from Aerpro will plug directly into the Ford Laser factory loom and then allow you to colour match to your new stereos loom. Only the earth isn't including in the factory loom so you'll have to do that separately. Part numbers are APP051 (has ISO connections on end) or AP7901F (no ISO connection on end). Either one will do the job, just you'd cut ISO connections off the first one, unless you were going to use them with another adaptor harness. I went down this path because I couldn't find any wiring diagrams and anything on the Internet was contradictory to my colours in the factory loom. And for $15 for the amount of time (and skinned knuckles) I saved - well worth it. KN Ford Laser 1999 Single DIN stereo originally
__________________
1976 XB Falcon 500 Wagon - BUILD THREAD Sherwood Green | 3spd/250CI | Running Whitewalls on a 2.5" Drop |
||
|
|
KN Laser Stereo
Linear Mode
