Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > MotorSport > Drag Racing

Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway.

Reply
 
Thread Tools Display Modes
Old 06-09-2013, 07:49 PM   #1
azza11
FF.Com.Au Hardcore
 
azza11's Avatar
 
Join Date: May 2006
Location: Toowoomba
Posts: 1,096
Default Pressures for normal radials

I have a mildly worked six in a XR wagon, i am running on the eighth, car weighs 1430 kg, my street wheels are 15x8 welds prostars with 255/60/15’s, i also have a pair of 185/14’s on my original steelies. I was going to fit these up when i drop the pipe, to me they have less roll out and should help it off the line by being smaller, wheels spin will not be an issue, not enough HP for that, the 14’s i figure should get me to the finish line quicker but i wondered as to what pressure i should run. I am changing the wheels at the track as car is to low to drive normally with the 14’s on, track only wheels.

__________________
1967 XR Falcon Wagon, Super Pursuit…….for now.
*****XR PARTS WANTED*******
azza11 is offline   Reply With Quote Multi-Quote with this Post
Old 08-09-2013, 03:06 PM   #2
Giant
FF.Com.Au Hardcore
 
Giant's Avatar
 
Join Date: Jun 2010
Posts: 4,760
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Organising Nulon to sponsor AFF. 
Default Re: Pressures for normal radials

I have used a range of pressures for the rears anything from 22 to 45 psi.
Fronts 50 to 55 psi.

Good luck and have fun
Giant is offline   Reply With Quote Multi-Quote with this Post
Old 09-09-2013, 03:38 PM   #3
dieseltrain79
FF.Com.Au Hardcore
 
Join Date: Dec 2009
Posts: 905
Default Re: Pressures for normal radials

I found 22psi in my normal street tyres worked best . And yep 45-50psi in fronts .
__________________
1998 AU VCT Ghia - Stock as a rock - Wifes car

1991 Toyota Soarer TT - 11.72 @ 116.7mph

2004 Ford Escape XLT V6 - Family Ride .
dieseltrain79 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 09-09-2013, 05:52 PM   #4
FPV GTHO
FF.Com.Au Hardcore
 
Join Date: Jul 2006
Posts: 7,331
Technical Contributor: For members who share their technical expertise. - Issue reason: Sharing his knowledge of performance exhaust setups for the NA 6 cyc Barra Falcon from BA to FG. 
Default Re: Pressures for normal radials

What profile were your street tyres?
FPV GTHO is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2013, 10:28 AM   #5
Giant
FF.Com.Au Hardcore
 
Giant's Avatar
 
Join Date: Jun 2010
Posts: 4,760
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Organising Nulon to sponsor AFF. 
Default Re: Pressures for normal radials

215 60 16
225 50 16
Giant is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2013, 09:54 PM   #6
dieseltrain79
FF.Com.Au Hardcore
 
Join Date: Dec 2009
Posts: 905
Default Re: Pressures for normal radials

Mine were 265/35/18 .
__________________
1998 AU VCT Ghia - Stock as a rock - Wifes car

1991 Toyota Soarer TT - 11.72 @ 116.7mph

2004 Ford Escape XLT V6 - Family Ride .
dieseltrain79 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 12-09-2013, 11:17 PM   #7
azza11
FF.Com.Au Hardcore
 
azza11's Avatar
 
Join Date: May 2006
Location: Toowoomba
Posts: 1,096
Default Re: Pressures for normal radials

My street tyres are 255/60/15, i have lowered the car with reset leaves and 2” lowering blocks, for the 15’s its as low as i could go with out being a major pain.
__________________
1967 XR Falcon Wagon, Super Pursuit…….for now.
*****XR PARTS WANTED*******
azza11 is offline   Reply With Quote Multi-Quote with this Post
Old 12-09-2013, 11:19 PM   #8
azza11
FF.Com.Au Hardcore
 
azza11's Avatar
 
Join Date: May 2006
Location: Toowoomba
Posts: 1,096
Default Re: Pressures for normal radials

Proper gearing if i wanted to optimize trap speed and revs would be 4.11’s, but would be a pain on the highway, car has 3.5’s as standard. Seen a XP sedan with 200/C4, he races the eighth and hist the limiter just before the fin line.
__________________
1967 XR Falcon Wagon, Super Pursuit…….for now.
*****XR PARTS WANTED*******
azza11 is offline   Reply With Quote Multi-Quote with this Post
Old 13-09-2013, 03:24 PM   #9
dieseltrain79
FF.Com.Au Hardcore
 
Join Date: Dec 2009
Posts: 905
Default Re: Pressures for normal radials

Probably limiter in 2nd gear for 1/8th mile , not 3rd.
__________________
1998 AU VCT Ghia - Stock as a rock - Wifes car

1991 Toyota Soarer TT - 11.72 @ 116.7mph

2004 Ford Escape XLT V6 - Family Ride .
dieseltrain79 is offline   Reply With Quote Multi-Quote with this Post
Old 14-09-2013, 09:33 PM   #10
azza11
FF.Com.Au Hardcore
 
azza11's Avatar
 
Join Date: May 2006
Location: Toowoomba
Posts: 1,096
Default Re: Pressures for normal radials

yeah i wish, its a 3 spd manual, will do 80 in second with stock 200 super pursuit and custom exhaust dropped, i am trying both on Sunday, got the big wheels, pipe up etc for a true street trim, then drop pipe, bolt on screamer pipe, 14’s and remove air cleaner, will get a good idea of what these changes do, bring on The Six Banger Nats
__________________
1967 XR Falcon Wagon, Super Pursuit…….for now.
*****XR PARTS WANTED*******
azza11 is offline   Reply With Quote Multi-Quote with this Post
Old 15-09-2013, 06:59 AM   #11
dieseltrain79
FF.Com.Au Hardcore
 
Join Date: Dec 2009
Posts: 905
Default Re: Pressures for normal radials

Depends on how fast it is as to whether it will run out of legs over the 1/4 .

18's should be up to 120
17's 130
16's 140
15's 150
14's 160

Rough guidelines , but averages show , lower in the Et range closer to the speed range .

Good luck .
__________________
1998 AU VCT Ghia - Stock as a rock - Wifes car

1991 Toyota Soarer TT - 11.72 @ 116.7mph

2004 Ford Escape XLT V6 - Family Ride .
dieseltrain79 is offline   Reply With Quote Multi-Quote with this Post
Old 17-09-2013, 02:50 PM   #12
azza11
FF.Com.Au Hardcore
 
azza11's Avatar
 
Join Date: May 2006
Location: Toowoomba
Posts: 1,096
Default Re: Pressures for normal radials

i won my class on the weekend at The Six Banger Nats at Warwick, i ended up buying 175/70/14’s, ran 25 pounds of pressure, seemed to be good, with the 3.50’s it wasn’t super fast at the fin line. Eighth mile drags, my best ET was 12.66 at 53.75, stock 46 year old bottom end, head has been off once for ULP conversion, untouched car, dizzy, custom exhaust with 2.5 inch collector and screamer pipe, no aircleaner on these runs, havent even timed the motor, seems spot on. Consistent, 8 races, no loss’s apart from
2 breakouts, car went quicker when it was around 30 odd degree’s in the sun back to back runs.
__________________
1967 XR Falcon Wagon, Super Pursuit…….for now.
*****XR PARTS WANTED*******
azza11 is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 19-09-2013, 04:39 PM   #13
dieseltrain79
FF.Com.Au Hardcore
 
Join Date: Dec 2009
Posts: 905
Default Re: Pressures for normal radials

That's awesome mate ! Well done .
__________________
1998 AU VCT Ghia - Stock as a rock - Wifes car

1991 Toyota Soarer TT - 11.72 @ 116.7mph

2004 Ford Escape XLT V6 - Family Ride .
dieseltrain79 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 06:57 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL