Fg 6pot brembo kit $2000 front limited

[FLOORED]

Limited promo push
For a limited time only we are virtually giving away these fantastic front only FG 6 Piston Brembo kits @ $2000 each.No need to explain the quality and benefits this kit would make to your vehicle.We can offer rear 4 or 1 piston kits as well.These kits do not fit most FG XR wheels and you will need wheels that will clear them.

FG 6 Piston front kit @ $2000
Brembo 355mm slotted rotors
Brembo 6 piston caliper
Brembo brake pads
Goodridge braided lines
Custom alloy brackets

[rancidpunx]

Looks great Matt.

What will the price be with both 4 and 1 rears be for a turbo ute?

[unr33l]

Interested, quick question though: How do the Brembo rotors compare to the DBAs?

[FLOORED]

Originally Posted by rancidpunx

Looks great Matt.

What will the price be with both 4 and 1 rears be for a turbo ute?

6/4 from $4000
6/1 from $3000
I have a "from" price as these are the most basic kits but everything is supplied in them and then we go up from there depending rotor or pad choice and in the single piston rear kit we also offer powder coated red rear calipers..
Rear 4 piston kits for utes are not really advised as you generally get pad knock off but the single piston rear kit are fine.

Originally Posted by unr33l

Interested, quick question though: How do the Brembo rotors compare to the DBAs?

The brembo rotors are good i generally suggest customers buy the kit with the Brembo rotors and when they have worn out go to a DBA one unless you are upgrading the rear as well because then we can do a dba all round package.

[dingdong555]

Any chance this may still be available in 3-4 weeks time? I'd be all over it!

[FLOORED]

Originally Posted by dingdong555

Any chance this may still be available in 3-4 weeks time? I'd be all over it!

Hard to say i had to beg to get the price down this time but if you are certain i would take a deposit from you and hold one for 3-4 weeks..

[dingdong555]

Originally Posted by FLOORED

Hard to say i had to beg to get the price down this time but if you are certain i would take a deposit from you and hold one for 3-4 weeks..

Could you PM me a price too with the 4 piston rears deal... Either standard brembo rotors or T3, whatever is cheapest I presume the brembo's are good rotors...

[Bdazla]

For those of us that have 4 pot fronts now, is it possible to get a kit that moves the current 4 pot to the rear with the appropriate braket and disc? Obviously after installing a 6 pot on the front.

Realistically wouldnlt need the front rotor either as it already has the 355mm brembo.

[rancidpunx]

Originally Posted by FLOORED

6/4 from $4000
6/1 from $3000
I have a "from" price as these are the most basic kits but everything is supplied in them and then we go up from there depending rotor or pad choice and in the single piston rear kit we also offer powder coated red rear calipers..
Rear 4 piston kits for utes are not really advised as you generally get pad knock off but the single piston rear kit are fine.

Thanks Matt, Is it possible to just up grade the front and leave the back of the ute with the standard set up.
Thanks

[rubber fire]

How much just for 4 pot rear calipers and hoses

[Wolfinsheepsclothing]

Originally Posted by rancidpunx

Thanks Matt, Is it possible to just up grade the front and leave the back of the ute with the standard set up.
Thanks

hi mate I run this kit(6-pots) on my gs with no problems,though been told that I should upgrade rears for better balance,which i'll eventually do when funds are available

[FLOORED]

Originally Posted by rubber fire

How much just for 4 pot rear calipers and hoses

PM Sent thanks

Originally Posted by Bdazla

For those of us that have 4 pot fronts now, is it possible to get a kit that moves the current 4 pot to the rear with the appropriate braket and disc? Obviously after installing a 6 pot on the front.

Realistically wouldnlt need the front rotor either as it already has the 355mm brembo.

There is no kit available for putting the front 4 pots on the rear and even if you could make a disc and bracket to adapt it the piston sizes are too big for a rear set up.
The $2000 FG front kit only comes in kit form sorry but you could try and sell the front rotors to gain some cash back.

Originally Posted by rancidpunx

Thanks Matt, Is it possible to just up grade the front and leave the back of the ute with the standard set up.
Thanks

Yes it can be done and many have done this but we do recommend to atleast run the larger single piston 328mm kit as soon as you can to balance it out.

[Bdazla]

Bugger. Lol

Thanks for the reply :-)

[FLOORED]

Looks like all these are all gone for now and thankyou for your support

[vevapower]

Haven't got one set hiding somewhere by any chance?

[FLOORED]

Originally Posted by vevapower

Haven't got one set hiding somewhere by any chance?

I wish sorry

[egoxr6]

bump

[FLOORED]

These kits will never be available again for that price in the near future