|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-04-2014, 02:25 PM
|
#1 | ||
|
[AUT-747]
Join Date: May 2010
Posts: 595
|
Hi guys,
I had an unfortunate thing happen to me the other day that a globe popped and shorted out my te50 instrument cluster. The instrument cluster works completely fine except it puts my car into limp mode. My feeling is that the speedo out has been burnt somewhere in the circuit. On inspecting the internals I notice a small printed wire had burnt out and split. So I got a tiny bit of copper and joined them together with solder. I plugged it back into the car and now I'm getting my range km on the trip computer but the car is still running in limp mode. Anybody have knowledge with these please help me out as nobody can seem to help me! cheers, alex. |
||
|
|
|
14-04-2014, 08:46 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: Sunbury, vic.
Posts: 3,110
|
you can join the speedo out to speedo in on the plug and then it should work, bypassing the cluster.
You may find however that the speedo sensor itself has lost the power feed, which comes from the dash, you would need to check it with a multimeter, to see if there is power across the ground/power feed to the speedo sensor.
__________________
T058 TS50 - 302 AFR165, Victor 5.0, Custom Cam, tuned by me, 245.6rwkw 329rwhp at 6800rpm. |
||
|
|
|
Te50 speedo issue
Linear Mode
