|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
29-04-2014, 04:17 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2014
Posts: 4
|
One of the rear clusters in my MC hatch has got quite a lot of dust inside, coating the reflective parts and building up at the bottom. I am planning to take it off the car and rinsing it out to get the dust out from inside. Getting the light custer off seems quite straight forward (bolts accessible behind the trim on the inside of the boot, lights can be disconnected/removed) - does anyone see any problems with my plan? I'm concerned that I won't be able to remove all the electronics, the water might damage the light or that it won't dry properly afterwards.
|
||
|
|
|
30-04-2014, 12:59 AM
|
#2 | ||
|
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
I know with the MB, you remove the connection and globe holder then it's just the three mounting nuts and it's out, it's all plastic from there on in so you can completely submerge in water and let dry.
|
||
|
|
|
|
01-05-2014, 02:28 PM
|
#3 | ||
|
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
I think the MC had LED rear lights. No idea what this means in terms of construction - led 'bulb' or moulded in at manufacture?
|
||
|
|
|
|
01-05-2014, 07:41 PM
|
#4 | ||
|
Starter Motor
Join Date: Feb 2014
Posts: 4
|
Thanks! I think only the Titanium has LEDs. Mine is a lowly LX with incandescent bulbs.
|
||
|
|
|
|
11-05-2014, 12:57 PM
|
#5 | ||||
|
Captain Malcolm Reynolds
Join Date: Mar 2007
Location: Adelaide
Posts: 3,830
|
My MC (Zetec) Hatch uses LEDs for the tail light "arch" & brake lights. The inidcators and reverse lights are normal globes.
Although there are two indicator globes per side, probably for redundancy.
__________________
Currently: 2014 Mazda6 GT (Daily) and 1999 Mazda MX5 (Fun Car) Previously: 2001 Ford Escape XLT; 2010 MC Mondeo; 1984 FD LTD; 2001 AU2 Falcon Forte; 2005 LS Focus Zetec; 1988 RE Colt; 1982 RB Colt; 1974 KE20 Corolla Quote:
Quote:
|
||||
|
|
|
Cleaning the rear light cluster on an MC hatch
Linear Mode
