BF F6 Fault Code

[FPV_Steve]

Hey guys,

Hope things are going well in the Bluepower shop!

The MIL Engine light has been on constantly for the past 2-3 days while driving around. I scanned for any fault codes and found the following fault code: P1132

I searched for the code here --> http://fordforums.com.au/dtc/dtc.php but it hasn't helped me with what might be the issue.

Are you guys able to shed any light on this code & whether it needs to be looked at asap?

Cheers,

Stephen.

[rsf6]

Hi Steve

Met you at the Albert park meet early last year I was the black roofed white f6 rspec

I had this on my BF F6 which is an O2 sensor fault
I reset a couple of times with the hand controller
Spoke to my tuner and he thinks could have been a couple of things
1 ran E100 fuel a couple of times
2 was June last year and the car had been outside while garage Renos were happening and possibly cold weather

Did not have the fault after resetting it a couple of times

Cheers jim

[Theo@BluePower]

I will give you a call Steve.. nothing to worry about

[FPV_Steve]

Originally Posted by Theo@BluePower

I will give you a call Steve.. nothing to worry about

Thanks for the call Theo! Good to hear it is not serious

Originally Posted by rsf6

Hi Steve

Met you at the Albert park meet early last year I was the black roofed white f6 rspec

I had this on my BF F6 which is an O2 sensor fault
I reset a couple of times with the hand controller
Spoke to my tuner and he thinks could have been a couple of things
1 ran E100 fuel a couple of times
2 was June last year and the car had been outside while garage Renos were happening and possibly cold weather

Did not have the fault after resetting it a couple of times

Cheers jim

Hey Jim,

How have you been?

Theo told me it is the O2 sensor as well so I'll just clear the fault tonight & hopefully that will sort it out for good!

Thanks for your input though mate

Cheers,

Stephen

[rsf6]

Hi Steve

All good getting to grips with the GTE which is on a respectful 380rwkw
looking at coilovers next all superpro bushes and probably fuel pump.
Next will be the cooler/pulley change injectors and maybe E85 to get into the 400s
When you guys going for a cruise again? would be good to catch up.
I see Julian has his F6 up for sale passed him on Bell St Monday
Cheers Jim

[99AUXR]

Little of topic. I wouldnt recommend going all super pro bushes or all nolathane had setup in my last car, was noisey hard horrible to drive.

Regards
Brad

[Theo@BluePower]

Brad we find the Super pro bushes the best of all the upgraded ones on offer. The Nolathane are the hardest so they transmit the most noise.

Atleast Superpro offer a lifetime warranty (in the right combo) with the falcon rear end bushes. In this combo we have had no issues and I have not seen a failure from them yet.

[99AUXR]

Awesome thanks mate. Sorry for mentioning another brand of bushes didn't realise this thread was in your section.