Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Site Sponsor Forums - In Alphabetical Order > ASL automedia

ASL automedia Specialising in the upgrade of BA/BF/Territory and FG audio and visual systems. We also repair all Ford (OEM) car stereos and produce OEM quality wiring harnesses. Website Link

Reply
 
Thread Tools Display Modes
Old 03-07-2014, 09:38 AM   #1
the_scotsman
MY21.5 Mustang GT
 
the_scotsman's Avatar
 
Join Date: Dec 2004
Location: Shoalhaven, NSW
Posts: 2,450
Default MKi9200 - BF Ghia

I've asked about this before, but I'm now ready to buy one and need some help.

From what I understand, it doesn't need a separate wiring kit to fit into a BF (Fairmont Ghia with premo sound)? It connects to the wiring behind the fuse box? Now if this is done, it uses the MKi9200 inbuilt amplifier?

I also believe that ASL have a custom wiring loom to adapt it to the BF, is that right? Does this also used the MKi9200 inbuilt amp? I've read that the amp is rather feeble and doesn't sound too great.

Is there a way to use the ICC wiring/output? Or would I need to purchase a separate in-line amp for the MKi9200 kit?

Any help with the best setup would be appreciated

__________________
2021 Mustang GT in Rapid Red | XDA-Developers Assistant Admin
the_scotsman is offline   Reply With Quote Multi-Quote with this Post
Old 03-07-2014, 11:43 PM   #2
foxtrot3
FF.Com.Au Hardcore
 
foxtrot3's Avatar
 
Join Date: Apr 2008
Posts: 5,461
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Technical articles. 
Default Re: MKi9200 - BF Ghia

Hi. Using the Mki 9100/9200 makes use of its inbuilt amp to drive the phone input from one of the parrots front speaker outputs, for this there is plenty of output. To feed fords aux input the low level or line outputs are used and "mute when streaming" is turned off. This gives a reasonable sound level that should be enough for most people depending on the music they listen to and how loud they want it. If its not enough an amped acc input could always be added later. I believe aerpro have just released a wiring kit for the BA/BF that would only require a couple of RCA plugs to be soldered on to the ends of the parrots low level outputs. Cheers MD
__________________


HI

I'M MICHAEL

2003 ACID RUSH BA FUTURA WAGON

light up window switches | auto on cruise control | doubleclick window lift from remote
foxtrot3 is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2014, 07:38 AM   #3
FADI75
Sponsor
 
Join Date: Jun 2005
Location: melbourne
Posts: 2,043
Default Re: MKi9200 - BF Ghia

Quote:
Originally Posted by the_scotsman View Post
I've asked about this before, but I'm now ready to buy one and need some help.

From what I understand, it doesn't need a separate wiring kit to fit into a BF (Fairmont Ghia with premo sound)? It connects to the wiring behind the fuse box? Now if this is done, it uses the MKi9200 inbuilt amplifier?

I also believe that ASL have a custom wiring loom to adapt it to the BF, is that right? Does this also used the MKi9200 inbuilt amp? I've read that the amp is rather feeble and doesn't sound too great.

Is there a way to use the ICC wiring/output? Or would I need to purchase a separate in-line amp for the MKi9200 kit?

Any help with the best setup would be appreciated
hi

we do have the specific harness where no soldering required, all plug and play, if you too fussed about sound you can also add the ASL line conditioner where it will reduce engine noise and amplify the signal off your ipod or iphone
see link below

http://www.asllogistics.com/product....1&cat=0&page=1

cheers


fadi75
__________________
FROM FALCON BA THROUGH FGX, TERRITORY SX THROUGH SZ - ICC UPGRADES, REPAIRS & INTEGRATION SPECIALISTS
AUTHORISED FORD REPAIR CENTRE
website: www.aslautomedia.com.au
email: info@aslautomedia.com
AUDIO INTERFACES, REVERSE CAMERAS, SATELLITE NAVIGATION & VIDEO INTEGRATION ON FACTORY COLOR SCREEN
FADI75 is offline   Reply With Quote Multi-Quote with this Post
Old 06-08-2014, 09:48 AM   #4
the_scotsman
MY21.5 Mustang GT
 
the_scotsman's Avatar
 
Join Date: Dec 2004
Location: Shoalhaven, NSW
Posts: 2,450
Default Re: MKi9200 - BF Ghia

Quote:
Originally Posted by foxtrot3
Hi. Using the Mki 9100/9200 makes use of its inbuilt amp to drive the phone input from one of the parrots front speaker outputs, for this there is plenty of output. To feed fords aux input the low level or line outputs are used and "mute when streaming" is turned off. This gives a reasonable sound level that should be enough for most people depending on the music they listen to and how loud they want it. If its not enough an amped acc input could always be added later. I believe aerpro have just released a wiring kit for the BA/BF that would only require a couple of RCA plugs to be soldered on to the ends of the parrots low level outputs. Cheers MD
When using this setup, or the ASL wiring kit on premo sound, does it still use the factory amp/sub as well as the speakers?

I guess the additional line conditioner from ASL would help amplify/clean the signal and avoid any engine whine or interference?
__________________
2021 Mustang GT in Rapid Red | XDA-Developers Assistant Admin
the_scotsman is offline   Reply With Quote Multi-Quote with this Post
Old 06-08-2014, 08:10 PM   #5
foxtrot3
FF.Com.Au Hardcore
 
foxtrot3's Avatar
 
Join Date: Apr 2008
Posts: 5,461
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Technical articles. 
Default Re: MKi9200 - BF Ghia

Quote:
Originally Posted by the_scotsman View Post
When using this setup, or the ASL wiring kit on premo sound, does it still use the factory amp/sub as well as the speakers?
Yes

Quote:
Originally Posted by the scotsman View Post
I guess the additional line conditioner from ASL would help amplify/clean the signal and avoid any engine whine or interference?
Most of the time
__________________


HI

I'M MICHAEL

2003 ACID RUSH BA FUTURA WAGON

light up window switches | auto on cruise control | doubleclick window lift from remote
foxtrot3 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:46 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL