Koni front shocks and brake line mounting

[pete05]

So my new ride has recently been fitted with koni shocks all round, the install was done by the previous owner, When I had the front wheel off it today I noticed they had the brake lines held to the shock with cable ties, has anyone got a better solution to this issue, I'm not a fan of my brake lines being held in place with these.

[Phildo]

There should be a bracket there.

[BLU-220]

my koni yellows had no bracket so i just cable tie it to the shocker,
i think only series 1 had them but as phildo has displayed get the bracket shown in the picture which i'll do when i fit the koni's to my next ride


cheers Dean

[BLU-220]

Originally Posted by AU2GHIA

my koni yellows had no bracket so i just cable tie it to the shocker,
i think only series 1 had them but as phildo has displayed get the bracket shown in the picture which i'll do when i fit the koni's to my next ride


cheers Dean

i correct myself series 1 didn't have them i think?? as on my original AU2 shocks had the brake line bracket welded on the shocker itself but my koni yellow's didn't have them maybe they where for a series 1

[pete05]

Thanks I will see if I can get some of those brackets from a B series.