|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
24-02-2015, 09:13 PM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2014
Posts: 10
|
Hello fellas ( and gals), was wondering if the 4 speed gearboxes off the kent/pinto motors are interchangeable, or if different bellhousings, gearbox mounts. etc are required?. Cheers.
|
||
|
|
|
25-02-2015, 12:57 AM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
interesting question
Engine Parts for Ford 1.6L & 2.0L (FF1600 & S2000 / FF2000) any pinto / kent motor setup owners out there ? http://www.thekentlives.com/ http://en.wikipedia.org/wiki/Talk%3AFord_Kent_engine
__________________
My car goes Brumm Brumm Last edited by dirty hands; 25-02-2015 at 01:02 AM. |
||
|
|
|
|
25-02-2015, 12:44 PM
|
#3 | ||
|
eskyman
Join Date: Sep 2005
Location: adelaide
Posts: 874
|
starter motor is on opposite side. im failry sure the box is the same just the bell housing thats different
__________________
who says kents cant be quick |
||
|
|
|
|
25-02-2015, 12:54 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Nov 2009
Posts: 2,868
|
Burton Power have a real good site with lots of technical info as well as parts.
http://www.burtonpower.com/ Type 2 (kent Escort) is interchangable with the Type E (kent Cortina) but the shifter location is slightly different so needs a mod to the tunnel. Thats what I have in my Mk1 Type 2 has a cast bellhousing so a Kent one probably won't fit onto a Pinto. the usual mod is a 5 speed type 9 that has a separate bell housing |
||
|
|
|
Escort Gearboxes
Linear Mode
