|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-03-2015, 08:04 PM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2011
Posts: 5
|
Hello all,
I have removed the troublesome MK2A Girling servo and installed a Lockheed. As soon as I start the car without touching the brake pedal the brakes lock on. When I take the cap off the white plastic breather ( under the letters "O" on the picture, it just pulls off and has a piece of plastic and a foam filter inside) and pull the little plunger up the brakes come off and I can roll the car. If I disconnect the vacuum to the servo the brakes do not lock on. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 
|
||
|
|
|
15-03-2015, 08:21 AM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
make sure the non return valve in the Lockheed.system is working (called one way air valve )
could be that cap is to be left off after fitting the booster ..not sure on that myself or the problem is in that black round disc called the air valve used as an example only http://www.triumph-spitfire.nl/servoimages.htm
__________________
My car goes Brumm Brumm Last edited by dirty hands; 15-03-2015 at 08:34 AM. |
||
|
|
|
New servo , brakes lock on
Linear Mode
