Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 04-07-2015, 02:48 PM   #1
Suh401
Starter Motor
 
Join Date: Nov 2011
Posts: 17
Default Esc

Hi guys, I have a 2010 fiesta zetec I will be taking it out on a track for the first time in the next month.
I have been told the esc may cause issues on the day. Does any one know how to turn the esc off manually or a wiring diagram so I can install a switch to turn it on and off for track days. Thanks guys.
Suh401 is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2015, 03:40 PM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default Re: Esc

stability control switch on and .off .....no idea ..pull a fuse ?

fang it around the track till something happens ...that ...you cant explain

only info i can find..about a fiesta today is on this system TC
traction control cant be bypassed on a 2010 fiesta

bet some have tried
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2015, 04:14 PM   #3
Suh401
Starter Motor
 
Join Date: Nov 2011
Posts: 17
Default Re: Esc

I was contemplating pulling the fuse Ill give it a go.
Thank you for your help..
Suh401 is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2015, 11:17 AM   #4
fiestaz
FF.Com.Au Hardcore
 
fiestaz's Avatar
 
Join Date: Nov 2009
Location: Sydney
Posts: 1,128
Default Re: Esc

I have pulled the fuse out on my ESC system in my WT. Some fault lights come up obviously, but it also shuts off the ABS (atleast i assume as that light came up also).
I also found my steering went into a really light setting, rather than its normal gain weight as you speed up setting.

The rest of the car worked as normal.
__________________
2016 Mazda 3 SP25 GT
2019 Hyundai i30 Active.
fiestaz is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2015, 09:33 PM   #5
Suh401
Starter Motor
 
Join Date: Nov 2011
Posts: 17
Default Re: Esc

Ok that's interesting, I'll just have to keep that In mind on the day that could be dangerous.
Suh401 is offline   Reply With Quote Multi-Quote with this Post
Old 17-07-2015, 03:10 PM   #6
mad axe
Starter Motor
 
Join Date: Aug 2011
Posts: 6
Default Re: Esc

on the ws zetec you can retro fit an esc off switch, the metal model has one. all you need is the same switch, connector is tucked up behind lower center consul panel, switch fits in card holder, just pull out panel find connector remove card holder fit switch panel in re install panel, 15 mins tops. plug n play.
mad axe is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:04 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL