|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
20-07-2015, 10:34 AM
|
#1 | ||
|
Starter Motor
Join Date: Jul 2014
Posts: 4
|
Hi guys,
I picked up a 2010 Zetec TDCI hatch yesterday and noticed the number plate on the rear looks to be mounted wrong. I suspect that there was supposed to be a plate holder there originally? Any help appreciated. Thanks |
||
|
|
|
20-07-2015, 10:56 AM
|
#2 | ||
|
PURSUIT 250
 
Join Date: Mar 2009
Location: sydney
Posts: 5,827
|
Dad's one has holes drilled through the center of the plate. Someone was lazy is my guess
|
||
|
|
|
|
20-07-2015, 07:38 PM
|
#3 | ||
|
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
Yeah whom ever did that is a clueless tard. When you close the hatch it's gonna flap and vibrate every time. Mine does even with the correct holder (something I've been meaning to tend to).
The License plate rear backplate holder is suppose to screw into the boot, then fit the license plate and then fit the front cover to the backing. You can get a proper holder for around $30 if you wanted to OP. When checking out a 2015 Mondeo TitX a couple of months ago they were in the process of scraping/removing the foam backing to fit the License plate directly onto that area like your pic shows OP. Talk about making a complete hash of it, prepsol wasn't doing jack. I just can't believe they're that tight to not finish it off with a proper holder. The guy didn't even get all of it off, only what was seen beyond the plate. |
||
|
|
|
|
21-07-2015, 07:45 AM
|
#4 | ||
|
Regular Member
Join Date: Apr 2014
Posts: 309
|
I'm seeing a lot of cars with plates fitted like that now. I don't know if its because the backing plates break so they screw the number plate into whatever holes line up on the car. Always crooked too. The OCD in me starts to twitch when I see them
__________________
2016 Kuga Trend TDCi |
||
|
|
|
|
21-07-2015, 08:00 AM
|
#5 | ||
|
Starter Motor
Join Date: Jul 2014
Posts: 4
|
Cheers guys.
I ended up speaking to Neil from secureaplate and he assured me he had something that would sort it out, so I've ordered it and will see how I go. |
||
|
|
|
|
23-07-2015, 09:30 AM
|
#6 | |||
|
Regular Member
Join Date: Mar 2009
Posts: 167
|
Quote:
A guy came out with a bag carrying a cordless drill and self tapping metal screws. After telling me the number plate screw holes don't match just lined the plates up and drilled them on. They seem okay although I had to undo them to get rid of the dealers number plate surrounds with its advertising on them. 
__________________
Cheers Pete Melbourne 2010 Ford Mondeo Zetec TDCi Diesel  Colour: Frozen White 
|
|||
|
|
|
MC hatch rear number plate holder
Re: MC hatch rear number plate holder
Linear Mode
