Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 23-07-2015, 05:17 AM   #1
4444chris4444
Starter Motor
 
Join Date: Aug 2014
Location: Yarra valley
Posts: 11
Default AU dash cluster problems

my LCD screen in my dash has speedo displayed on it and the back lights don't work the globes are ok yet the heater control back lights work fine any one on here had this problem it's frustrating I can't see my speed, the back light on lcd screen works, and my clock won't keep time, is the problem my BCM?
Attached Images
File Type: jpg image.jpg (139.7 KB, 16 views)
4444chris4444 is offline   Reply With Quote Multi-Quote with this Post
Old 23-07-2015, 03:50 PM   #2
Fyrestorm
Spanner Thrower
 
Join Date: Oct 2013
Location: Parramatta
Posts: 296
Default Re: AU dash cluster problems

First time I've ever seen "speed" come up on there, usually its base or fair. Diagnostics mode maybe? (Hold the trip meter pin down for 5-10seconds with the Reds lit. I think that's how you get out of it)

I'm guessing car starts/runs ?
__________________
1999 AU Futura Wagon (Nickname Betsie the Barge-***)
Current Mods: Fairmont Cluster, LED's Changed to Purple, Lukey Competition Extractors, 2.5" Hi flow Cat, Hi-Stall Converter, ED Box with FG internals, AUIII VCT Fuel Rail + Injectors, F6 Fuel Regulator, Stereo upgrade, Aftermarket LPG.

Awaiting Wife Approval Mods:

TE50 Front Bar, AU Tickford/SR Interior, Roof Racks, Slimline Weathershields, 2.5" Cat Back Exhaust, 27mm Front Sway Bar, Other Shiny things!
Fyrestorm is offline   Reply With Quote Multi-Quote with this Post
Old 23-07-2015, 03:57 PM   #3
4444chris4444
Starter Motor
 
Join Date: Aug 2014
Location: Yarra valley
Posts: 11
Default Re: AU dash cluster problems

It runs fine Iv tried the diagnostic mode all modes work apart from the speedo witch is number 4 I think, I disconnected the BCM and reconnected it and the speedo display was gone, Iv searched the forum and couldn't find anything
4444chris4444 is offline   Reply With Quote Multi-Quote with this Post
Old 23-07-2015, 04:23 PM   #4
Fyrestorm
Spanner Thrower
 
Join Date: Oct 2013
Location: Parramatta
Posts: 296
Default Re: AU dash cluster problems

On the phone atm, I'll dig up the link When in front of the pc, but sounds like cluster diagnostic. I'm guessing the normal speedo doesn't work at all?
__________________
1999 AU Futura Wagon (Nickname Betsie the Barge-***)
Current Mods: Fairmont Cluster, LED's Changed to Purple, Lukey Competition Extractors, 2.5" Hi flow Cat, Hi-Stall Converter, ED Box with FG internals, AUIII VCT Fuel Rail + Injectors, F6 Fuel Regulator, Stereo upgrade, Aftermarket LPG.

Awaiting Wife Approval Mods:

TE50 Front Bar, AU Tickford/SR Interior, Roof Racks, Slimline Weathershields, 2.5" Cat Back Exhaust, 27mm Front Sway Bar, Other Shiny things!
Fyrestorm is offline   Reply With Quote Multi-Quote with this Post
Old 23-07-2015, 04:26 PM   #5
4444chris4444
Starter Motor
 
Join Date: Aug 2014
Location: Yarra valley
Posts: 11
Default Re: AU dash cluster problems

All the gauges work fine apart from the back lights
4444chris4444 is offline   Reply With Quote Multi-Quote with this Post
Old 23-07-2015, 05:06 PM   #6
Fyrestorm
Spanner Thrower
 
Join Date: Oct 2013
Location: Parramatta
Posts: 296
Default Re: AU dash cluster problems

Standard lights or aftermarket less? I accidentally burnt my control board in the cluster after I changed mine to UV leds. Had to pull the whole cluster apart to solder the break.

If you have a multimeter, get the cluster out, plug it all in And test the sockets to see if they are getting power. (I'd say check the 5a fuse marked "HEGO" but your heater controls are still lighting up.
__________________
1999 AU Futura Wagon (Nickname Betsie the Barge-***)
Current Mods: Fairmont Cluster, LED's Changed to Purple, Lukey Competition Extractors, 2.5" Hi flow Cat, Hi-Stall Converter, ED Box with FG internals, AUIII VCT Fuel Rail + Injectors, F6 Fuel Regulator, Stereo upgrade, Aftermarket LPG.

Awaiting Wife Approval Mods:

TE50 Front Bar, AU Tickford/SR Interior, Roof Racks, Slimline Weathershields, 2.5" Cat Back Exhaust, 27mm Front Sway Bar, Other Shiny things!
Fyrestorm is offline   Reply With Quote Multi-Quote with this Post
Old 23-07-2015, 05:14 PM   #7
4444chris4444
Starter Motor
 
Join Date: Aug 2014
Location: Yarra valley
Posts: 11
Default Re: AU dash cluster problems

Standerd lights, all the fuses are ok
4444chris4444 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:16 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL