Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 21-08-2015, 03:28 PM   #31
markrenee08
Regular Member
 
markrenee08's Avatar
 
Join Date: Aug 2015
Posts: 37
Default Re: 351 or worked 302

Hey thanks mate

yea iv seen them..bit far to travel but at $10k geez thats cheap...also i do like the look of the older XC twin headlights rather the square..is it simple enough to change the front grill to suit the twin headlights?
markrenee08 is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2015, 04:44 PM   #32
Tex Scrotum
FF.Com.Au Hardcore
 
Tex Scrotum's Avatar
 
Join Date: Feb 2015
Posts: 701
Default

Quote:
Originally Posted by markrenee08 View Post
So clearly body is #1 priority



tbh im new to all these classics and kind of not confident knocking around the gaurds and boot liner lol



is it as simple as expecting *ting ting and not a *thud thud (bog)



me father inlaw knows a bit of old classics and owns HG ute, will have a yarn with him about it all and try and learn as much as I can



Thanks again for the vital information

If you want to get to know these cars then go to the PROJECT CAR threads and scroll through them until you find the model you're interested in, then spend a few hours (days) reading through them.
Project car threads are generally full of photos, great tech info and heartbreaking stories.
After reading through a few dozen threads you will soon become familiar with the rust prone areas and how much work it can take knocking these cars into shape.

There's plenty of great builds in there and I guarantee you'll learn a heap but more importantly it will arm you with some valuable info that you won't find in books or magazines.

Learn, learn, LEARN!!!

Be patient.

It probably took you along time to save those 20 Gs so spend a bit more time doing some research!

You won't regret it 😉

Cheers and good luck 😃
Tex Scrotum is offline   Reply With Quote Multi-Quote with this Post
5 users like this post:
Old 21-08-2015, 05:55 PM   #33
jaydee
FF.Com.Au Hardcore
 
jaydee's Avatar
 
Join Date: Feb 2007
Location: Perth
Posts: 7,230
Default Re: 351 or worked 302

Quote:
Originally Posted by markrenee08 View Post
Hey guys,

im about to buy my first classic (pretty novice)..always wanted one and now have the cash to get one yay.

im stuck between 2 XC's one is worked 302 and the other pretty stock 351 both around same price

both in really good condition, i had my heart set on 351 but 302 is slightly better cond and looks really good compared to the 351

any info from u guys would be really really appreciated...

Mark
Mate if you were prepared to pay 25 for that one on Gumtree, have a look at this one in Perth for 20, you could get it shipped and have change for 25. It's only the 302 but it's a GXL and a very nice car in a very rare colour.
http://www.gumtree.com.au/s-ad/singl...ce-/1087176433
__________________
jaydee351
4DV8
jaydee is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 21-08-2015, 05:59 PM   #34
markrenee08
Regular Member
 
markrenee08's Avatar
 
Join Date: Aug 2015
Posts: 37
Default Re: 351 or worked 302

Yea mate nice and clean but not settled on that colour and keen on 351, thanks for keeping an eye out mate
markrenee08 is offline   Reply With Quote Multi-Quote with this Post
Old 21-08-2015, 07:27 PM   #35
fordmfp
Blue blooded
 
fordmfp's Avatar
 
Join Date: Oct 2007
Location: New Zealand
Posts: 707
Default Re: 351 or worked 302

Dam that blue GXL is awesome!! Love the colour and it looks bloody tidy
__________________
My XA Coupe build

http://www.fordforums.com.au/showthread.php?t=11259539
fordmfp is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 21-08-2015, 07:35 PM   #36
SSVPom
Formally FairmontPom
 
Join Date: Mar 2006
Location: Melbourne
Posts: 1,125
Default Re: 351 or worked 302

I saw this Gilbarco Blue GXL for sale in VIC on carsales back in '07 or '08, most likely before it was treated to a resto. Nice car, and prob worth the money.
__________________
1998 XH Falcon V8 S Pack, white, couple of dents. Bogan project
2024 Everest Platinum
SSVPom is online now   Reply With Quote Multi-Quote with this Post
Old 21-08-2015, 09:47 PM   #37
Harrison
Regular Member
 
Join Date: Apr 2015
Posts: 146
Default Re: 351 or worked 302

http://www.gumtree.com.au/s-ad/clift...=LF-automotive
Harrison is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2015, 02:31 AM   #38
Crazy Dazz
FF.Com.Au Hardcore
 
Join Date: Feb 2008
Location: Perth, Northern Suburbs
Posts: 5,011
Default Re: 351 or worked 302

The best thing about the XC was the Crossflow engine, but if you're chasing a V8 that doesn't matter.

Unless it is a genuine GXL with matching numbers, then there is not much special about XC sedans. If you're happy enough with a car that started as a brown 6 and is now a red V8, then you'll find some decent ones for around the $10k mark.

Despite its inconsistencies, there's nothing terribly wrong with the first car you posted, but its not original, not in any way rare, and not worth what he's asking.

As for being stuck on the 351, remember that a 302 is simply a de-stroked 351. Depending on what heads she's running, 351 cubes only needs a new crank and pistons. As has been said, you're better off buying a good body and putting some money into the engine.
__________________
2024
Making Whine from the Tears of Hippies
Crazy Dazz is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2015, 05:33 AM   #39
XB GS 351 Coupe
FF.Com.Au Hardcore
 
Join Date: Oct 2010
Location: Mid North Coast
Posts: 6,443
Default Re: 351 or worked 302

Quote:
Originally Posted by Harrison View Post
This is more like it, all the desire-able parts as well as a factory V8 with matching numbers.
__________________
The Daily Driver : '98 EL Falcon, 5 Speed , 3.45 lsd

The Week End Bruiser : FPV BF GT 40th Anniversary, 6 Speed Manual, 6/4 Brembo and lots of Herrod goodies

Project 1 : '75 XB GS 351 Ute, Toploader, 9" with 3.5's

Project 2 : '74 XB GS Big Block Coupe, Toploader, 9" with 4.11's

In Storage : '74 XB GS 351 Fairmont Sedan



XB Falcon Owners Group



Mike's Man Cave


XB GS 351 Coupe is offline   Reply With Quote Multi-Quote with this Post
Old 23-08-2015, 10:10 PM   #40
39ClevoUte
FF.Com.Au Hardcore
 
39ClevoUte's Avatar
 
Join Date: May 2006
Posts: 1,498
Default Re: 351 or worked 302

First warning sign...it's on Gumtree, then it carries on from there as others have pointed out. Original is king, bitsa's are not worth the trouble.
39ClevoUte is offline   Reply With Quote Multi-Quote with this Post
Old 25-08-2015, 07:38 AM   #41
markrenee08
Regular Member
 
markrenee08's Avatar
 
Join Date: Aug 2015
Posts: 37
Default Re: 351 or worked 302

i know its on gumtree...but any thoughts on this

http://www.gumtree.com.au/s-ad/10862...ontent=product

Roadworthy condition. Many dollars spent $14000 on paint alone. New shocks, coils, spring saddles, tie rod ends, ball joints, extractors, straight through muffler. Heads resurfaced. Fmx auto transmission just serviced. 351ci 5.8 litre engine. No rust

The engine is a 5.8 litre 351 cubic inch cleveland engine. Bottom end hasn't been touched but compression still good, Heads have been taken off and been re surfaced and new head gaskets put on. Has Edelbrock dual plane performer inlet manifold and 780cfm holley thats newish and recently replaced all gaskets. New radiator, new hoses, new fuel line from sender to engine. New leads, new rocker covers and air cleaner. Just recently got new extractors and straight through muffler installed. Transmission is orginal fmx auto which are reknowned for strength. Minimal rust all major rust wast cut out before paint, only some minor surface rust, paint was re done 4 years ago but it hasn't been driven much since then. Go to facebook and search Custom Classic's Inc will be more photos on there. Kind regards, Jack Hi, can you send me more details, motor, rust, transmission thanks mark
markrenee08 is offline   Reply With Quote Multi-Quote with this Post
Old 25-08-2015, 07:53 AM   #42
cs123
Donating Member
Donating Member3
 
cs123's Avatar
 
Join Date: Jan 2005
Location: Morayfield
Posts: 28,117
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Can't think of anyone more deserving. Russ Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For all the technical support behind the scenes. Tech Writer: Recognition for the technical writers of AFF - Issue reason: Technical submission 
Default Re: 351 or worked 302

Keep looking.
__________________
I love Holdens....
cs123 is online now   Reply With Quote Multi-Quote with this Post
4 users like this post:
Old 25-08-2015, 08:00 AM   #43
Captain Stubing
Looking for clues...
Donating Member3
 
Captain Stubing's Avatar
 
Join Date: Jan 2005
Location: Morayfield
Posts: 23,501
Default Re: 351 or worked 302

I saw that first red one driving around a couple of months ago, and nearly snapped my neck turning around to see what the hell had gone wrong. Someone needs to tell him he's dreaming!
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute
1985 XR4Ti Sierra - Build Thread
1971 Fairlane 500
and... a collection of Jeep Towpigs
and... two collections of rust and some new plastic bits roughly shaped like an F-Truck
and.... some spare metal bits with holes in them
Captain Stubing is online now   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 25-08-2015, 01:45 PM   #44
Tex Scrotum
FF.Com.Au Hardcore
 
Tex Scrotum's Avatar
 
Join Date: Feb 2015
Posts: 701
Default

Definitely not my cuppa tea.

And errrrrr yeah keep looking 😉
Tex Scrotum is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 25-08-2015, 06:55 PM   #45
XB GS 351 Coupe
FF.Com.Au Hardcore
 
Join Date: Oct 2010
Location: Mid North Coast
Posts: 6,443
Default Re: 351 or worked 302

This would be worth a look, GXL with Factory wind back sunroof.

http://www.gumtree.com.au/s-ad/ather...rwc/1086998252

Only concern I have is no engine bay photos and does not even tell you what engine it has.
__________________
The Daily Driver : '98 EL Falcon, 5 Speed , 3.45 lsd

The Week End Bruiser : FPV BF GT 40th Anniversary, 6 Speed Manual, 6/4 Brembo and lots of Herrod goodies

Project 1 : '75 XB GS 351 Ute, Toploader, 9" with 3.5's

Project 2 : '74 XB GS Big Block Coupe, Toploader, 9" with 4.11's

In Storage : '74 XB GS 351 Fairmont Sedan



XB Falcon Owners Group



Mike's Man Cave


XB GS 351 Coupe is offline   Reply With Quote Multi-Quote with this Post
Old 25-08-2015, 07:05 PM   #46
Captain Stubing
Looking for clues...
Donating Member3
 
Captain Stubing's Avatar
 
Join Date: Jan 2005
Location: Morayfield
Posts: 23,501
Default Re: 351 or worked 302

Quote:
Originally Posted by XB GS 351 Coupe View Post
This would be worth a look, GXL with Factory wind back sunroof.

http://www.gumtree.com.au/s-ad/ather...rwc/1086998252

Only concern I have is no engine bay photos and does not even tell you what engine it has.

The chassis # is JG32UG*****K, so originally a V8.
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute
1985 XR4Ti Sierra - Build Thread
1971 Fairlane 500
and... a collection of Jeep Towpigs
and... two collections of rust and some new plastic bits roughly shaped like an F-Truck
and.... some spare metal bits with holes in them
Captain Stubing is online now   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 25-08-2015, 07:07 PM   #47
XB GS 351 Coupe
FF.Com.Au Hardcore
 
Join Date: Oct 2010
Location: Mid North Coast
Posts: 6,443
Default Re: 351 or worked 302

I love this one:

http://www.ebay.com.au/itm/Falcon-XC...item1a04e63b24
__________________
The Daily Driver : '98 EL Falcon, 5 Speed , 3.45 lsd

The Week End Bruiser : FPV BF GT 40th Anniversary, 6 Speed Manual, 6/4 Brembo and lots of Herrod goodies

Project 1 : '75 XB GS 351 Ute, Toploader, 9" with 3.5's

Project 2 : '74 XB GS Big Block Coupe, Toploader, 9" with 4.11's

In Storage : '74 XB GS 351 Fairmont Sedan



XB Falcon Owners Group



Mike's Man Cave


XB GS 351 Coupe is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 25-08-2015, 07:23 PM   #48
BPXR6T
FF.Com.Au Hardcore
 
Join Date: Mar 2006
Posts: 3,910
Default Re: 351 or worked 302

If that's going for 22K I should maybe blow the dust off my XB GT and sell!
BPXR6T is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 25-08-2015, 07:31 PM   #49
markrenee08
Regular Member
 
markrenee08's Avatar
 
Join Date: Aug 2015
Posts: 37
Default Re: 351 or worked 302

Quote:
Originally Posted by BPXR6T View Post
If that's going for 22K I should maybe blow the dust off my XB GT and sell!
Yes sell it to me lol
markrenee08 is offline   Reply With Quote Multi-Quote with this Post
Old 25-08-2015, 07:41 PM   #50
markrenee08
Regular Member
 
markrenee08's Avatar
 
Join Date: Aug 2015
Posts: 37
Default Re: 351 or worked 302

Quote:
Originally Posted by XB GS 351 Coupe View Post
That does look very nice n cheap
markrenee08 is offline   Reply With Quote Multi-Quote with this Post
Old 25-08-2015, 07:52 PM   #51
markrenee08
Regular Member
 
markrenee08's Avatar
 
Join Date: Aug 2015
Posts: 37
Default Re: 351 or worked 302

Quote:
Originally Posted by swanny View Post
The chassis # is JG32UG*****K, so originally a V8.
I spoke with tony the owner, everything seemed really well amd looked after, am very considering this even tho i wanted 351...302 will do if its not a bitser and plus its only 3hr drive away
markrenee08 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 25-08-2015, 08:01 PM   #52
last fairlane
FF.Com.Au Hardcore
 
last fairlane's Avatar
 
Join Date: Jan 2008
Location: brisbane
Posts: 1,316
Cool Re: 351 or worked 302

Hay Mark head down to the Jimboomba swap this Sunday the 30th
you would get to see some cars and maybe talk to someone from the Ford club there entrance is off Greenbank road Jimboomba beside the high level bridge
John
last fairlane is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 25-08-2015, 08:56 PM   #53
markrenee08
Regular Member
 
markrenee08's Avatar
 
Join Date: Aug 2015
Posts: 37
Default Re: 351 or worked 302

Quote:
Originally Posted by last fairlane View Post
Hay Mark head down to the Jimboomba swap
Hey thanks mate love to but bit far to travel as im way north in Townsville
markrenee08 is offline   Reply With Quote Multi-Quote with this Post
Old 26-08-2015, 12:04 AM   #54
jstanovic
FF.Com.Au Hardcore
 
Join Date: Feb 2013
Location: Perth
Posts: 830
Default Re: 351 or worked 302

Its in Perth but looks to be an awesome car!

http://www.gumtree.com.au/s-ad/singl...ce-/1087176433
jstanovic is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:09 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL