|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
14-02-2006, 06:35 PM
|
#1 | ||
|
EB-WEPN
Join Date: Jun 2005
Location: Nothern Sububs
Posts: 2
|
I cant get my car to start, it doesnt seem to be sparking.
I've replaced the coil and we've tried completely charging the battery. I got told told the dizzie's in the EB's were nearly bullet proof. Does any one have any ideas? Could it be TFI Module or Dizzy? Cheers..
__________________
EB-WEPN = White, Series I, King Spring Ultralows, 2 1/2 inch Mandrel Bent Red Back!!! |
||
|
|
|
14-02-2006, 06:38 PM
|
#2 | ||
|
Regular Member
Join Date: Nov 2005
Location: Melbourne, Vic
Posts: 448
|
Make sure the leads are in the correct order, and if it's an auto make sure it's in park or neutral and not in gear and check all your fuses.
|
||
|
|
|
|
14-02-2006, 06:46 PM
|
#3 | ||
|
EB-WEPN
Join Date: Jun 2005
Location: Nothern Sububs
Posts: 2
|
thanx for that ill check it out
__________________
EB-WEPN = White, Series I, King Spring Ultralows, 2 1/2 inch Mandrel Bent Red Back!!! |
||
|
|
|
|
01-03-2006, 11:46 AM
|
#4 | ||
|
Donut King
Join Date: Feb 2006
Location: oakleigh
Posts: 43
|
Hows it going? i take it you still have no spark. if you've replaced you ignition module then your next step would be to replace your TFI module mounted on the dizzy. dizzy will have to be removed to do so and timing re-set at TDC. i'd replace hall effect sensor also since the dizzy is out. If you know what your doing shouldn't take more than two hours to do the lot. That should definitly get the thing started. Coils are very common but if that doesnt wix then 99% its your TFI.
|
||
|
|
|
|
01-03-2006, 12:53 PM
|
#5 | ||
|
rofl copter
Join Date: Aug 2005
Location: Werribee
Posts: 3,692
|
is it a series 2 eb? if it is check that there is a red flashing light on the dash, if not check the fuses and i gaurentee ur problem will be smart lock related
__________________
GQ patrol.
.... thats all |
||
|
|
|
EB Fairmont Ignition Problem!!
Linear Mode
