|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
02-11-2016, 08:55 PM | #1 | ||
Starter Motor
Join Date: Jun 2016
Posts: 17
|
Can anyone advise how to detach the shiny metal "protection " strip from the back ledge of the wagon. It needs to be replaced due to a "mishap". Apart from a wrecker, where is the best source for a new one?
|
||
02-11-2016, 09:33 PM | #2 | ||
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
wreckers ebay/gumtree or overseas would be my guess.
|
||
02-11-2016, 09:37 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,680
|
|
||
02-11-2016, 09:45 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,680
|
|
||
02-11-2016, 10:22 PM | #5 | ||
Starter Motor
Join Date: Jun 2016
Posts: 17
|
yes 17k922B
|
||
02-11-2016, 10:43 PM | #6 | ||
Regular Member
Join Date: Dec 2015
Location: Dubbo, formerly Canberra
Posts: 342
|
I think it's the rear bumper protector/scuff plate that Mondoman is referring to (indeed part 17K922B in the posted pdf). (Edit: beaten to it)
I believe it's simply affixed with adhesive, so it should just be a matter of wrestling it off. You could try injecting a glue remover/cleaner like Oomph under the plate to help it pry loose. You can get a new one on ebay, both genuine and third-party options should be available. (I've looked before as mine also has a dent in it, but I haven't been game to go through with trying to remove and replace it.) |
||
02-11-2016, 11:00 PM | #7 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,680
|
That part has a part number of BS71 17C979 AB genuine Ford.
It is not in the Workshop manual I have, just how to remove the whole bar. I have my car booked into my dealer tomorrow, so will see if they have one and check it out for you.. |
||
03-11-2016, 06:23 AM | #8 | ||
Starter Motor
Join Date: Jun 2016
Posts: 17
|
I look forward to your reply. I will try mild heat first, then solvent iy that doesn't work.
Don |
||
03-11-2016, 08:40 PM | #9 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,680
|
They did not have one there, but are getting me some photos of one to see. They said to give them a couple of days..
|
||
03-11-2016, 09:43 PM | #10 | ||
Starter Motor
Join Date: Jun 2016
Posts: 17
|
|
||
04-11-2016, 08:46 PM | #11 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,680
|
Hi Don,
I have seen the part you are talking about but having dramas uploading the photo. To confirm the back of it is like one big piece of double sided tape, so a plastic scraper or trim removed should be used to pry it up from the sides enough to get your fingers under, then slowly peel it off... |
||
04-11-2016, 10:42 PM | #12 | ||
Starter Motor
Join Date: Jun 2016
Posts: 17
|
good work
|
||
06-11-2016, 07:38 PM | #13 | ||
Starter Motor
Join Date: Jun 2016
Posts: 17
|
There is a German high quality carbon fibre strip that can be stuck onto the external part of the chrome strip. Seems like a good alternative.
I suspect that the current strip is stuck on with double sided tape. Don |
||