Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 17-10-2016, 01:07 PM   #1
Kryton
 
Kryton's Avatar
 
Join Date: Dec 2004
Posts: 9,292
Default JAN 2001 AUII Wont Crank/start

Have a bit of an issue with a Jan 2001 AUII Sedan at the moment.
Car was recently bought but not really used so has sat around for a couple of months.
It had been thought the battery was flat so we jump started the car and drove it 60km home.
Drove fine, no issues other than a small stutter from a lead i suspect.
Started the car again after arriving home and it started fine.
Tried it a few hours later when it was cold, it cranked over fine but didnt start after 3 or 4 turns so let the key off and tried it again - nothing at all.
Doesnt tick, doesnt crank.
Electrics work, battery was reading 12.5v, tried jumping and still nothing at all.
Still is the same today. tried giving the starter motor a crack - didnt change anything.
Fuses all seem fine.
Theres only 1 key and no FOB.
Smartshield hand flashes on dash normally when car is off.
Smartshield hand goes out when put to ACC.
Smartshield hand stays on when holding key in START position.
When held in START position, a ! with a circle around it appears and stays on till the key is released.
Fuel pump seems to work as well.

Ideas on what to try, look at or whats going on would be appreciated.
As this isnt my car, ive limited knowledge of its history but i did mention that it was thought to have a flat battery after it was bought and left for the couple of months (unreg) so was only moved around the yard. Im thinking the "flat battery" issue may have been something else and coincidentally, its come good and started after playing around with the battery for a bit.
Kryton is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2016, 01:53 PM   #2
PridenJoy
Donating Member
Donating Member1
 
Join Date: Nov 2011
Location: Melbourne
Posts: 4,573
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For his contributions to the forum, especially showcased with his highly detailed AU build threads. He is a fountain of AU knowledge. 
Default Re: JAN 2001 AUII Wont Crank/start

The exclamation mark is just the dash light indicator that hand brake is on.

Is the car dual fuel?
PridenJoy is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2016, 02:09 PM   #3
Kryton
 
Kryton's Avatar
 
Join Date: Dec 2004
Posts: 9,292
Default Re: JAN 2001 AUII Wont Crank/start

Just straight petrol.
At least the exclamation mark has nothing to do with it - thanks.
Kryton is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2016, 02:18 PM   #4
PridenJoy
Donating Member
Donating Member1
 
Join Date: Nov 2011
Location: Melbourne
Posts: 4,573
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For his contributions to the forum, especially showcased with his highly detailed AU build threads. He is a fountain of AU knowledge. 
Default Re: JAN 2001 AUII Wont Crank/start

The only AUs i have seen not crank or tick when key is turned have either been immobilized (smart shield) or on dual fuel and the switch was on neither fuels (in the middle).
PridenJoy is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2016, 02:20 PM   #5
Beastie
The Terrain Tamer
Donating Member3
 
Beastie's Avatar
 
Join Date: May 2013
Posts: 36,577
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Catering services for a bunch of layabouts and for being an all-round good guy whose sense of community goes above and beyond. 
Default Re: JAN 2001 AUII Wont Crank/start

Auto or Manual?

Is it in Park?
__________________
Current Ride : A Ford owned D3...
Beastie is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2016, 02:40 PM   #6
Kryton
 
Kryton's Avatar
 
Join Date: Dec 2004
Posts: 9,292
Default Re: JAN 2001 AUII Wont Crank/start

Auto.
Tried Park and Neutral and didnt make a difference.
Is there a way to test the park switch?
Kryton is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2016, 03:37 PM   #7
Kryton
 
Kryton's Avatar
 
Join Date: Dec 2004
Posts: 9,292
Default Re: JAN 2001 AUII Wont Crank/start

Quote:
Originally Posted by PridenJoy View Post
The exclamation mark is just the dash light indicator that hand brake is on.

Is the car dual fuel?
Actually went and had a look and its not indicating the hand brake is on.
Hand brake is indicated by the P in a red circle.
Took the hand brake off and the exclamation mark is still showing when turning the key to START
Kryton is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 17-10-2016, 03:50 PM   #8
FAT245
Lacking Imagination
 
FAT245's Avatar
 
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
Technical Contributor: For members who share their technical expertise. - Issue reason: Nath deserve's a Technical Contributor award for his willingness to share everything in his vast knowledge of tuning EEC-IV and -V Falcons, not to mention engines! 
Default Re: JAN 2001 AUII Wont Crank/start

That would be the Brake Fail Switch.

The Schematics show that the the brake fail switch is inline with the ignition switch wiring.
__________________


My 11 Second AU Fairlane
364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W
FAT245 is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2016, 04:02 PM   #9
Kryton
 
Kryton's Avatar
 
Join Date: Dec 2004
Posts: 9,292
Default Re: JAN 2001 AUII Wont Crank/start

Quote:
Originally Posted by FAT245 View Post
That would be the Brake Fail Switch.

The Schematics show that the the brake fail switch is inline with the ignition switch wiring.
But that wouldnt stop the car from cranking at all would it?
Would that light clear once started?
Kryton is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 17-10-2016, 04:17 PM   #10
PridenJoy
Donating Member
Donating Member1
 
Join Date: Nov 2011
Location: Melbourne
Posts: 4,573
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For his contributions to the forum, especially showcased with his highly detailed AU build threads. He is a fountain of AU knowledge. 
Default Re: JAN 2001 AUII Wont Crank/start

Quote:
Originally Posted by Kryton View Post
Actually went and had a look and its not indicating the hand brake is on.
Hand brake is indicated by the P in a red circle.
Took the hand brake off and the exclamation mark is still showing when turning the key to START
My bad, got my dash symbols mixed up. As mentioned it's still brake related but not the handbrake
PridenJoy is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2016, 04:38 PM   #11
FAT245
Lacking Imagination
 
FAT245's Avatar
 
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
Technical Contributor: For members who share their technical expertise. - Issue reason: Nath deserve's a Technical Contributor award for his willingness to share everything in his vast knowledge of tuning EEC-IV and -V Falcons, not to mention engines! 
Default Re: JAN 2001 AUII Wont Crank/start

Brake Fail Switch provides a Ground.
ill have to look at them closer when Home, the low res ones on the Forum cna only tell me so much.
__________________


My 11 Second AU Fairlane
364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W
FAT245 is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2016, 05:35 PM   #12
OzriderXR8
Regular Member
 
OzriderXR8's Avatar
 
Join Date: Dec 2015
Location: West of Melbourne
Posts: 488
Default Re: JAN 2001 AUII Wont Crank/start

My battery was going flat and doing similar things, I took off the earth leads to the body and engine, wire brushed everything and put it back, no problems since.
__________________
Cheers Ozrider

AUII XR8 200KW
FG MK2 XR6
Mini 850
Rover P5 3 Litre Mk1
OzriderXR8 is offline   Reply With Quote Multi-Quote with this Post
Old 17-10-2016, 06:57 PM   #13
Kryton
 
Kryton's Avatar
 
Join Date: Dec 2004
Posts: 9,292
Default Re: JAN 2001 AUII Wont Crank/start

So had a look (moved around) the BCM an now the relay in the dash doesnt click either when the key is on START.
Tested the relay itself and its still fine.
Whats going on?
Kryton is offline   Reply With Quote Multi-Quote with this Post
Old 21-10-2016, 01:14 PM   #14
Spurious
Guest
 
Join Date: May 2013
Posts: 1,934
Default Re: JAN 2001 AUII Wont Crank/start

That battery is stuffed, assume that first. Car batteries, once flattened, are never the same again. Will never hold full charge as the lead plates get deformed.

Next look at starter motor, starter solenoid & the wiring in between it & the battery.

Sputter whilst driving could be indicative of either the battery/alternator not providing enough base power to the electrical system, or the coil pack/leads are shot.

I'm no auto sparky but a bad battery in these cars is bad news. They rely heavily on computer software to function.
Last time my battery was stuffed the system would randomly forget my remotes. Had to reprogram them several times. The traction control system doesn't like being deprived of power either. With my old battery in place it would sometimes take up to a minute to activate/deactivate the T/C, it just wouldn't do anything when you push or hold the button.
Spurious is offline   Reply With Quote Multi-Quote with this Post
Old 30-10-2016, 12:14 PM   #15
Drecian
Regular Member
 
Join Date: Sep 2015
Posts: 66
Default Re: JAN 2001 AUII Wont Crank/start

Quote:
Originally Posted by Spurious View Post
I'm no auto sparky but a bad battery in these cars is bad news. They rely heavily on computer software to function.
There is truth in this, as with many other modern cars.

Have a look at the cranking volts first. Then try jump-starting it to eliminate the battery from the issue.
__________________
Jeff
'99 AU1 Fairlane
Drecian is offline   Reply With Quote Multi-Quote with this Post
Old 29-11-2016, 09:19 PM   #16
Kryton
 
Kryton's Avatar
 
Join Date: Dec 2004
Posts: 9,292
Default Re: JAN 2001 AUII Wont Crank/start

So finally got around to having a look at the car again today to suss it out.
Seems there are 2 issues at play.
One is the starter motor being stuffed (tested by bypassing the car itself) and it looks like the car has been immobilized, which from what i can gather requires a trip to Ford to wave their magic wand over it.
Kryton is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 12:00 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL