Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 22-08-2017, 07:44 PM   #1
Dpm
Starter Motor
 
Join Date: Aug 2017
Posts: 3
Default Focus Trend LZ, rear end shaking, bouncing

Focus Trend 2016 (Oct build) registered June 17
LZ - 6 speed manual

(Issue happened at 2100klm mark)

3 months ago I bought the new Focus from a dealer here in Melbourne.

It has been fine, however i just experienced something that concerns me, and wonder if its part of the issues re transmission recently brought to light in the media. However i think those issues only relate to the auto, not the manual i have and to earlier models?

Driving down Rind Road here in Melb, on a smooth as silk piece on road, i had to drop down to 30 k, then going up to 40k in 3rd gear the car started bouncing. It seemed to come from rear, maybe.

I was in seat bobbing up and down like there were corrugations running across the road. The bobby up and down was smooth, no gerking, there was no sounds rattles from anywhere, motor running fine etc.

Then still at 40k in 3rd the bouncing seemed to stop but then the back started shaking from side to side, like the rear wheels were lose and about to fall off.

I then changed into 4th around 45 k and the shaking stopped instantly, and it was all back to normal again.

All this from start till end was around under one minute.

The car other than this moment runs dead straight, as it did while it happened, the steering wheel has no shaking, the car has felt compleatly normal, its just been that one instant.

And since that moment its been fine again, 300k later. I have tried to make it do it again, without success.

It happened at the 2100klm mark, so almost ready to take in for the first dealer 3000klm check.

So like to know what people may think before i get the usual dealer run around.

The car has not hit any pot holes been off road etc, so its not wheel alignment or the like.

I am wondering was it the sensor for towing trailers, as in anti trailer shake mode kicking in when shouldn't have. (no i was not towing).

Any help thoughts welcomed.
Dpm
Dpm is offline   Reply With Quote Multi-Quote with this Post
Old 22-08-2017, 11:46 PM   #2
WindsorXR
FGII XR6, Focus Sport, XR
 
WindsorXR's Avatar
 
Join Date: Nov 2005
Location: Geelong, Victoria
Posts: 1,715
Default Re: Focus Trend LZ, rear end shaking, bouncing

That's a weird one.
It will be interesting if anything comes back in terms of Diagnostic Trouble Codes.
I'd be making sure everything back there is tight first of all.....but that should have been done in the pre-delivery. Maybe the ABS sensors were going funny with the stability control kicking in??? Any lights coming up on the dash?

Either way I'd probably be taking it into the dealership early. It sounds pretty dangerous
__________________
Living Ford dreams

2011 Purple FGII XR6
2016 LZ Focus Sport

BA XR8 Build Thread (SOLD)
1966 XR Falcon Build Thread
WindsorXR is offline   Reply With Quote Multi-Quote with this Post
Old 23-08-2017, 10:36 AM   #3
Dpm
Starter Motor
 
Join Date: Aug 2017
Posts: 3
Default Re: Focus Trend LZ, rear end shaking, bouncing

Quote:
Originally Posted by WindsorXR View Post
That's a weird one.
It will be interesting if anything comes back in terms of Diagnostic Trouble Codes.
I'd be making sure everything back there is tight first of all.....but that should have been done in the pre-delivery. Maybe the ABS sensors were going funny with the stability control kicking in??? Any lights coming up on the dash?

Either way I'd probably be taking it into the dealership early. It sounds pretty dangerous
No lights came on at all, the car felt normal but for the bobing up and down and then the shaking.
Dpm is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:23 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL