fan switch/ac

perthtx5 · 04-03-2006, 02:40 PM

Hi i am new to this site and have read quite a lot of problems that people have had with there telstars which will come in handy if they happen to me.
I currently have a problem with my 88 telstar tx5 ghia, when i switch fan on to position 1 or 2 the ac compressor kicks in but no fan speed, when I put it to 3 or 4 fan cuts in but ac compressor turns off. I pulled the unit out of dash thinking it may be worn connectors, there is six wires running into the fan speed box 1 for each speed ,earth & power i presume, there is power to possistion 3 & 4 but not 1 & 2. So i hope somebody might point me in the direction i should be looking as everything else seems to work like it should.
It also might be the fan motor itself but i cant find where the power for 1 & 2 comes from.
Cheers for any help!

dirty hands · 05-03-2006, 10:01 AM

maybe a gas leak in the air con system
or the switch needs replacing sent you a pm anyway

jonzo · 11-03-2006, 06:57 PM

Hey guys, I have a similar problem, I thought that by now you might have some insight into solving it.

My problem is that my fan was going perfectly well (I don't have a/c) then one day it just stopped working. I know that it's not the fan because I connected it directly to the battery and it goes well, I've checked all the fuses - they were fine, and I've had a look at the switch which didn't seem broken (worst comes to worst, I might just try putting in a new one, but I want to put it off for now).

My question is: Is there any other things in the heater/fan system that just die without warning? Someone mentioned a fan resistor that I might try to find... and I'm unsure about relays (there is a 'blower' relay and a 'cooling fan' relay, i'm unsure which is refering to the fan on the radiator, and which is the internal fan, and no idea how to test them).

So yeah! i'm pretty stumped. Any advice, suggestions, or even just random guesses much appreciated!

Cheers.

Scareybear · 11-03-2006, 11:26 PM

with the relays, swap them over to test them, the 'cooling fan' is for the radiator, I'm not sure about telstars but holden fan resistors go all the time.

perthtx5 · 17-03-2006, 07:16 PM

Hi Jonzo i just had my fan speed switch fixed, the auto electrician replaced a faulty resistor, he put a second hand one in but he said new price was about $149 plus fitting.Not quite sure where the resistor goes but it has three plugs on one side and 4 elements on the other side (like a kettle element).

Hope it helps

bmbentley · 17-03-2006, 08:02 PM

on my oldies KF laser, 1 did not work then 2 didnt work, then 3 didnt work, then it worked again, now it doesnt, neither does 4.

this car does not have aircon.

another fault is the interior light, always blows bulbs if u leave it set on door.

ok car but plenty of minor faults