|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
24-11-2017, 11:03 AM
|
#1 | ||
|
Regular Member
Join Date: Jan 2011
Posts: 36
|
Hi.
My 2011 diesel is going into limp mode after about 2 to 3 hours on the highway. I got a cheap scan tool off eBay and the error is p2263. In the past I was advised to change an $800 dpf injectior in the exhaust. That hasn't helped. |
||
|
|
|
24-11-2017, 11:44 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 805
|
My 2011 diesel also had limp mode and p2263.
Replacing the boost solenoid fixed it. Same thing happened with our other 2011 diesel, same fix. In both cases the valve was mooing on switch off, which may or may not be a sign of impending failure. In any case, the new valves are quiet. |
||
|
|
|
|
24-11-2017, 07:54 PM
|
#3 | ||
|
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
two common areas for that fault:
3. Boost actuator (as said above) 2. EGR valve stuck open also a split turbo hose is said to give a similar code.Does it judder around 1800rpm? (pretty sooty)
__________________
Undecided replacement... [SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD] |
||
|
|
|
Going into limp mode on highway
Linear Mode
