|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
15-02-2018, 10:07 AM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2018
Posts: 6
|
hi forum,
I have a 2012 Focus ST Hatch. my first post, I have a 2012 Focus ST Hatch. the inner skin of the driver's door has a plastic screw point that gets screwed to the metal of the door, it has broken so now the top of the skin near the window is not sitting flush. my question is it possible to glue the plastic tag back to the inner of the door skin and if so what type of glue would I use? I have added a pic from you tube, it shows the location or the removal point near the door jam thanks in advance |
||
|
|
|
15-02-2018, 10:10 AM
|
#2 | ||
|
Starter Motor
Join Date: Feb 2018
Posts: 6
|
|
||
|
|
|
|
16-02-2018, 10:23 AM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,699
 
|
|
||
|
|
|
|
18-02-2018, 04:57 PM
|
#4 | ||
|
Starter Motor
Join Date: Feb 2018
Posts: 6
|
thanks for the diagram but I was not too sure so took some pics - see attachments , upon removal of the door skin I found 3 mounts broken. I am thinking of finding a plastic welder or a replacement door skin, unless you have another idea, I'd be happy to hear that ,
|
||
|
|
|
broken clip focus
Linear Mode
