|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
03-07-2018, 03:27 PM | #1 | ||
Starter Motor
Join Date: Mar 2016
Posts: 21
|
Recently changed filter on Mondeo Ma series Duratec 2.3 litre HE engine.
I inspected oil filter and realised it had no Anti drain back valve! So after cutting filter open I had close inspection,no anti drain back valve so thought being motorcraft fords own it actually from dealer and as always I notice there made in Thailand. I think it already cheap labour to make and slice off a bit more cost and don’t put anti drain back valve. So I buy a Ryco synthetic premium one just to compare and the Ryco have much better filter element I got the one with synthetic suppose to be better and has silicon Anti drain valve and thicker metal body made stronger to go 15000km services it says. I using Ryco for now on!! Also buy a cooper oil filter by wix apparently owned by Ryco and wix cheaper than the other 2 seem well made and has synthetic anti drain back valve! Why would you go to the dealer to buy motorcraft. |
||
03-07-2018, 08:12 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Mar 2005
Posts: 5,281
|
Good filter testing there mate.
Ye i prefer to pay a bit more for Ryco or Coopers with the anti drain back valve too! |
||
03-07-2018, 09:11 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: May 2016
Posts: 1,828
|
Same never had any dramas with Ryco.
|
||
03-07-2018, 09:50 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Apr 2007
Posts: 1,953
|
depends on the filters part number i got my motorcraft 6 pack of filter's for my ba 5.4ltr off amazon USA $5 each per filter and they have a very thick & sturdy anti drain back valve way better than the ryco's iv used on other cars previously
__________________
GIMME FUEL, GIMME FIRE, GIMME THAT WHICH I DESIRE. ---------------------------------------------------------------- BA falcon XT mkII, 5.4lt, 5sp, Y-code, xy windowless pano, 3 on the tree manual. re-shelled xy falcon GT, manual. 1980 honda CX500 scrambler/dirt tracker |
||
03-07-2018, 09:59 PM | #6 | ||
FF.Com.Au Hardcore
Join Date: May 2016
Posts: 1,828
|
I suppose i only use Z9's and Z418's and have found the Rycos good i havent used motorcraft ones since the cars came out of warranty.
|
||
04-07-2018, 10:14 AM | #7 | ||
Starter Motor
Join Date: Mar 2018
Posts: 21
|
Is that the Motorcraft F1AZ6731BD ?
|
||