|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
06-07-2015, 05:58 PM | #1 | ||
Starter Motor
Join Date: Sep 2014
Posts: 25
|
Hi Mondeo drivers, Still loving my 2010 Mondeo, however the warning light for low washer fluid level keeps coming on even though I've filled up the washer tank. Any ideas? I tried looking on this forum, but couldn't find the answer. Thanks in advance!
|
||
07-07-2015, 12:37 AM | #2 | ||
Chairman & Administrator
Join Date: Dec 2004
Location: 1975
Posts: 107,286
|
If it's on all the time then check that the wire to the sensor isn't damaged or disconnected. It's one of those where no signal = a negative signal.
Cheers Russ
__________________
Observatio Facta Rotae
|
||
07-07-2015, 03:27 AM | #3 | ||
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
here's a trick for you, I had similar issue about a year ago.
Blow into the filler neck with all the lung power you have, obviously lips sealing the tube and then release and move your face out of the way (in case you get splash back) then go check for the error. It shouldn't show the error anymore. TIP: now is time to get washer fluid instead of water and fill it when near empty. I find it's much better for the pump/system than water alone. (if currently using water only that is) |
||
07-07-2015, 06:57 AM | #4 | ||
Starter Motor
Join Date: Sep 2014
Posts: 25
|
Hi Cobrin and Russellw, thank you both for those suggestions. I will try both and let you know how I go and yes, I am just filling with water, will get some washer fluid instead. Thx
|
||
08-07-2015, 10:02 AM | #5 | |||
Regular Member
Join Date: Mar 2009
Posts: 167
|
Quote:
Handy to see if mine stays off and if not some fix its here to try. Good luck with yours.
__________________
Cheers Pete Melbourne 2010 Ford Mondeo Zetec TDCi Diesel Colour: Frozen White |
|||
08-07-2015, 11:53 AM | #6 | ||
Starter Motor
Join Date: Sep 2014
Posts: 25
|
Would you believe it hasn't come back on since I made this post! I've been waiting for it to come on so I could try these things and now it's suddenly stopped! Will remember this for next time though. Good luck with yours sailaway!
|
||
09-07-2015, 10:54 AM | #7 | ||
IWCMOGTVM Club Supporter
Join Date: Sep 2005
Location: Northern Suburbs Melbourne
Posts: 17,799
|
The switch on these things are pretty simple (just a float switch). You can check to see if its the switch by shorting out the plug its connected to. Should act the same as if the tank was filled.
__________________
Daniel |
||
12-07-2015, 12:03 PM | #8 | |||
Regular Member
Join Date: Mar 2009
Posts: 167
|
Quote:
Thanks
__________________
Cheers Pete Melbourne 2010 Ford Mondeo Zetec TDCi Diesel Colour: Frozen White |
|||
19-09-2018, 03:45 PM | #9 | ||
Regular Member
Join Date: Mar 2013
Posts: 49
|
Same problem with my 2012 Mondeo. It looks like I have to crawl underneath (and probably take-off the big cover) to get at the switch - can anyone confirm that is correct ?
|
||
19-09-2018, 08:25 PM | #10 | ||
Challenge Accepted!
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
|
I noticed mine ('09) were easier to get to with the LH/F wheel arch off.
__________________
Undecided replacement... [SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD] |
||
This user likes this post: |