|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
21-07-2019, 05:08 PM | #1 | ||
#neuteredlyfe
Join Date: Apr 2012
Posts: 10,625
|
Hi Everyone
I pulled the cluster out of my AUII XR6 the other day and fixed the cluster lights. Put it back in and all good. Since then, the tacho has started playing up. It reads high when the car is turned on. When I turn the car off the needle returns to zero and shakes. After about 5-10 seconds the needle stops shaking and sits at 250 RPM. All of the other gauges 'appear' to be working fine including the speedo. I've checked the pins and they all seem to be straight and making contact with the plug. I haven't swapped with another cluster as my spare ones are down at my Mother's at the moment (long story). I don't want to swap it with my XR8 one just in case it starts to play up as well. Has anyone else experienced this? What did they do to fix it? Thanks in advance. |
||
21-07-2019, 06:09 PM | #2 | ||
#neuteredlyfe
Join Date: Apr 2012
Posts: 10,625
|
Well... this could be shortest thread of all time.
After two solid days of trying to fix it, I just took it for a drive and it is behaving like nothing was ever wrong. I hate it when things fix themselves - it will come back to bite you when you least want it to. |
||
This user likes this post: |