|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
17-06-2020, 01:15 PM
|
#1 | ||
|
Regular Member
Join Date: Sep 2018
Posts: 440
|
 Hey guys, does anyone have any experience with these push-in breather fittings? I just couldn't get mine to fit, it seems like the middle 'spigot' part is too big for the hole that it's going into. I measured it and it seems like it's about 1mm larger than the hole. I even tried freezing the breather and heating the rocker cover and they were still nowhere near fitting. Even if I did get it on this way, there's no way that I'd be getting it off again, and since it's too big for the coil cover to fit over, I wouldn't be able to remove it to take the coil cover off. Has anyone put these on before? Is there a trick to it? Thanks guys |
||
|
|
|
17-06-2020, 01:20 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2006
Posts: 754
|
Hi Metdevil.
The latest car I've owned is an AU3. Just for my own curiosity ...... What are they and what do they do ??? Something to do with the PCV system ??? Cheers. |
||
|
|
|
|
17-06-2020, 01:44 PM
|
#3 | ||
|
Regular Member
Join Date: Sep 2018
Posts: 440
|
Hey gutza,
They're for the Barra, there are two of them, the rear one is the PCV valve and the front is just a breather which vents back into the intake. I want to fit a catch can to minimise oil build up in the intake, the rear fitting just presses in to a rubber grommet, but this front one is metal on metal and doesn't seem to be anywhere close to being the right size. Just wondering if I'm missing something really. |
||
|
|
|
|
17-06-2020, 02:37 PM
|
#4 | ||
|
It's not an FG MKI.......
Join Date: Nov 2006
Location: Northern Territory
Posts: 7,436
|
Not the same brand, but I have them fitted to my car.
Catch can off the PCV fitting and the breather just runs back to the inlet manifold. Tight, but the front one is in there. I just hammered it in far enough with a piece of timber.
__________________
06/08 Manual FG XR6T. Not an FG1 or MKI, an FG...  Want to know how to do an A Service for an FG XR6T? Look in this http://fordforums.com.au/showthread.php?t=11339404 Thinking of oil sampling your engine? Have a look at this trend http://fordforums.com.au/showthread....ght=oil+sample |
||
|
|
|
|
17-06-2020, 02:45 PM
|
#5 | ||
|
Regular Member
Join Date: Sep 2018
Posts: 440
|
Don't you need to remove it to take the coil cover off, though?
|
||
|
|
|
|
17-06-2020, 03:20 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2006
Posts: 754
|
Hi Metdevil.
Thanks. Learning a few things about the Barra engine. Cheers. |
||
|
|
|
|
17-06-2020, 03:39 PM
|
#7 | |||
|
It's not an FG MKI.......
Join Date: Nov 2006
Location: Northern Territory
Posts: 7,436
|
Quote:
I have a 90 degree fitting on mine for bonnet clearance also. I'll see if I can dig up a pic and post it.
__________________
06/08 Manual FG XR6T. Not an FG1 or MKI, an FG... Want to know how to do an A Service for an FG XR6T? Look in this http://fordforums.com.au/showthread.php?t=11339404 Thinking of oil sampling your engine? Have a look at this trend http://fordforums.com.au/showthread....ght=oil+sample |
|||
|
|
|
| This user likes this post: |
|
17-06-2020, 08:03 PM
|
#8 | ||
|
It's not an FG MKI.......
Join Date: Nov 2006
Location: Northern Territory
Posts: 7,436
|
Crap picture but you. get the idea
__________________
06/08 Manual FG XR6T. Not an FG1 or MKI, an FG... Want to know how to do an A Service for an FG XR6T? Look in this http://fordforums.com.au/showthread.php?t=11339404 Thinking of oil sampling your engine? Have a look at this trend http://fordforums.com.au/showthread....ght=oil+sample |
||
|
|
|
| This user likes this post: |
|
18-06-2020, 06:41 AM
|
#9 | ||
|
Regular Member
Join Date: Sep 2018
Posts: 440
|
Thanks Phantm,
I guess I'm just going to have to be a bit more aggressive with it. |
||
|
|
|
Any experience with these push-in breather fittings?
Re: Any experience with these push-in breather fittings?
Linear Mode
