Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 24-08-2020, 06:26 PM   #1
car10002
FF.Com.Au Hardcore
 
Join Date: Aug 2010
Posts: 1,643
Default Chassis number question

Hi everyone

For a old 60s/70s viscount van that still has rego plate but doesn’t have chassis number or the rego paper can’t be found how would you go about getting the chassis number or a replacement chassis number for the old rego number on the van if particular one hasent been registered in a lot of years

Can you just make up your own chassis number for the rego number or get a vin number for it or is there a way to get hold of the chassis number for it if it has one

Thanks
car10002 is offline   Reply With Quote Multi-Quote with this Post
Old 24-08-2020, 06:47 PM   #2
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: Chassis number question

Your best bet would be to contact your local Dept of Transport or Police station.
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 24-08-2020, 08:08 PM   #3
car10002
FF.Com.Au Hardcore
 
Join Date: Aug 2010
Posts: 1,643
Default Re: Chassis number question

If getting new vin and rego no and id check can you name it as viscount or millard or franklin whatever it is originally or does it have to be homemade in the make section of mr1
car10002 is offline   Reply With Quote Multi-Quote with this Post
Old 24-08-2020, 08:23 PM   #4
leesa
Guest
 
Posts: n/a
Default Re: Chassis number question

Quote:
Originally Posted by car10002 View Post
If getting new vin and rego no and id check can you name it as viscount or millard or franklin whatever it is originally or does it have to be homemade in the make section of mr1
That's probably a question for the police but in my case i applied for a new vin for a car and the paperwork stated the model it was, it wasn't labelled homemade.

You'll probably need to take it to a local police station for inspection and then the police will issue you with a new vin which you'll then need to get stamped on the chassis. the transport department and police department will communicate with each other to book it in.
  Reply With Quote Multi-Quote with this Post
Old 24-08-2020, 08:30 PM   #5
car10002
FF.Com.Au Hardcore
 
Join Date: Aug 2010
Posts: 1,643
Default Re: Chassis number question

What’s steps to new vin and rego on vans do know in sa for trailers it’s

Get vin and put on id plate then on trailer

Get permit

Go to weigh bridge

Go to police for id check

Register
car10002 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:24 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL