![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Regular Member
Join Date: Mar 2010
Location: Adelaide
Posts: 284
|
Just need to know how to reset cheers.
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FG XR6 Ute & Sedan
![]() Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,941
|
For Climate Control with engine at normal operating temperature (coolant at at least 45 degrees C), ignition on, press "Mode" and "Off" button simultaneously. Well actually press the "Off" button a microsecond after holding down the "Mode" button so you don't simply turn it off. This will put it into diagnostic mode and it will take a minute or two to run through the diagnostics will all display segments lit. It will then either show any fault codes if there are faults or switch to "Off" and reset the system. For the Trip Computer just press the "reset" button in each of the modes (e.g. Av Speed and Av Fuel Consumption) that you want reset.
__________________
regards Blue |
||
![]() |
![]() ![]() |