|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
19-10-2020, 10:58 AM
|
#1 | ||
|
Regular Member
Join Date: May 2010
Posts: 80
|
Hi all,
I was wanting to fire up my Clevo after being dormant for many years. Cleaned around base of distributor, removed it and to my annoyance there was some undetected dirt under the distributor housing, and as it goes, some entered the block through distributor hole. How much pain am I looking at ???? |
||
|
|
|
19-10-2020, 03:45 PM
|
#2 | ||
|
RS The Faster Fords
 
Join Date: Feb 2014
Location: Westralia
Posts: 1,694
|
You could gaffer tape a smaller hose to the end of you vacuum and try to suck as much out as you can to start.
__________________
Escort RS2000 Restored factory a/c and alloys. TD Cortina Unrestored 35 000km 6cyl manual. Mk1 GT Cortina Project. FG XR50 Daily. |
||
|
|
|
|
19-10-2020, 03:52 PM
|
#3 | ||
|
FG XR6 Ute & Sedan
 Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,518
|
I'd just tip a few liters of cheap oil down the distributor hole at speed then do a cold engine oil and filter change.
__________________
regards Blue |
||
|
|
|
|
19-10-2020, 04:14 PM
|
#4 | ||
|
Regular Member
Join Date: May 2010
Posts: 80
|
Thanks guys,
I was thinking of a flush also. I spose with a combination of suck n flush might help do the job. Ill sit back for a cuppla days and cool off a bit, see if there's anymore ideas and decide on a plan. Cheers |
||
|
|
|
|
19-10-2020, 04:21 PM
|
#5 | |||
|
Donating Member
Join Date: Jan 2005
Location: Morayfield
Posts: 28,146
  
|
Quote:
__________________
I love Holdens.... |
|||
|
|
|
19-10-2020, 04:37 PM
|
#6 | ||
|
Regular Member
Join Date: May 2010
Posts: 80
|
Yep, I'll certainly give it a try.
Cheers |
||
|
|
|
|
19-10-2020, 08:42 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2012
Posts: 3,878
|
I would be thinking a bit like Aussieblue except I would just wash it down into the sump with a couple of litres of diesel then maybe another couple of litres to flush the sump out.You haven’t run it so the crud will just wash down.
|
||
|
|
|
|
27-10-2020, 07:49 PM
|
#8 | ||
|
Regular Member
Join Date: May 2010
Posts: 80
|
Hi all, I thought I posted this Sunday night, but mustn't of pressed post,
SO I'd like to thank all who contributed with suggestions of solutions to my dallema. What I thought was a diabolical situation, turns out to be a not so unusual event. Armed with suggestions from this forum and other contacts my worries are gone, along with the contaminants that invaded the block. Thanks again |
||
|
|
|
How much PAIN ?
Linear Mode
