|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
18-02-2021, 12:32 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2018
Posts: 10
|
I think these are transmission codes
|
||
|
|
|
18-02-2021, 05:04 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,680
 
|
Check for a loose earth on the LH chassis rail just under the air cleaner. If you can rotate the eyelet, then its a possibility its a bad earth and can cause the two codes you are referring to.
Could also be attributed to EGR and MAP sensor issues. |
||
|
|
|
|
18-02-2021, 10:43 PM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2018
Posts: 10
|
I will start by pulling out the egg valve assembly. Thanks for your help.
|
||
|
|
|
|
19-02-2021, 03:49 PM
|
#4 | ||
|
Starter Motor
Join Date: Feb 2018
Posts: 10
|
Blanked off EGR and took it for a 50km run. No codes. New EGR with cooler $724 from Ford!
|
||
|
|
|
P0700, P1719 codes on a MC 2L diesel
Linear Mode
