![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway. |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Gota be happy with a Hump
![]() Join Date: Dec 2004
Location: Sydney
Posts: 476
|
Headed out to WSID last night with Lowride260 and Hot460 for a bit of fun. Was pleased to meet XR8Ute for the first time. PhantomXR8 was also there but not racing this week.
The temp ranged from about 25 early on to about 20 at the end of the night. Wade spent all night cranking out his 12.9's with his big launches. Man those slicks sound good when they bite into the tarmac. Rich was pleased with his first pass in the BF XR8 auto, bog stock, and then spent the rest of the night a bit pi$$ed that he didn't get a 13. I think 14.001 and 100 mph was his best from his new work ute. Well done Rich. Take your tools out of the car next time mate! XR8Ute got a couple of new PB's but not sure of the details. I was pleased with my runs, two low 13.2's and four 13.1's with a new PB of 13.109. The mph readings in the right hand lane were reading about 2-3 mph down compared to the right lane so I am not too worried about the indicated 104.99 mph. My ute was pretty consistent and felt strong. Got sideways once on the 1-2 change and just spun it up on the change to 2nd on another run with the M/T ET streets. It hasn't done it that bad before. I still got a lot of work to do on my 60'. There was a BA Fairmont there with a boss 260 in it. I have seen him there before doing high 13's but last night he was on the bottle. 125 HP shot was running mid 12's at around 115 mph (I think) with 2.2 60'. He was hitting the button after the launch, (until he gets decent tyres for his next outing.) He was over the moon with his results. If I have any details wrong I am sure I will be corrected by those concerned LoL.
__________________
![]() ![]() 12.756 @ 107.16..........1.915 60' Genuine Unopened Time ![]() ![]() |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
AFF.com.au
Join Date: Dec 2004
Posts: 2,128
|
sounds like you guys had fun - especially the guy with the nos........
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
RIP Craig - 13/11/08
![]() Join Date: Feb 2005
Location: Kilmore, 30 minutes from Heathcote Raceway
Posts: 3,571
|
Great stuff MYV8 well done, 12's can't be too far away for ya. And Wade with arms and legs going everywhere is mr consistent that's for sure good job guys. Might have to make a little trip up there in the coming weeks, would love to run on a quality strip like you guys got up there.....
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Now a FG XR8 in Nitro
Join Date: Dec 2004
Location: Sydney
Posts: 550
|
Yeh Chris, you have some work to do on that 60'. I saw the 1st to 2nd change, a wiggly good time. Drop that 60' and your downing one of those elite 12 second cans. Maybe a tyre change, Wade style, will see you get there!
__________________
Nitro XR8 6 Speed Manual - SS Inductions Growler, Herrod Headers John Bowe exhaust 0-60kph 2.46 secs |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Back on the road
Join Date: Dec 2004
Location: Wollongong, NSW
Posts: 3,205
|
It was nice to finally get out to WSID in some reasonably good air.
Was really cool to meet you guys last night, there was certainly no missing the Bluepower utes. And 14.007 from a stock BF XR8 Auto was seriously impressive. I was pretty happy with my runs, a couple of low 14.2's and a couple of 14.1's. My best run was my last, a 14.153 @ 98.68 with a 2.134 60' (PB before last night 14.291 @ 97.47 with a 2.155 60'). I'd love to know how i might go with a bigger converter, a tune, and some slicks. Just need top save some cash. How hot is Jim Reads daughter ![]()
__________________
------------------------------------------------------------------------- AU XR8 Ute 13.90 @ 100mph - http://www.aufalcon.com/xr8ute 5L Windsor, GT40X heads, Crane 2030, Pacey 4-1s, Lukey 3", 3.91:1, auto. Tuned by me w/Quarterhorse and BinaryEditor. Coming Soon: Ported lower intake, Tickford "Premium" Brakes, and a good wash. |
||
![]() |
![]() ![]() |
![]() |
#6 | |||
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Working, chasing after my daughter and working
Posts: 3,407
|
Quote:
Did a little suspension change for last night didnt help drop my 60's but seem to be the most consistant I ever been best run 12.96@106.66 1.816 60' (best mph) to worst of 13.03 anyway nothing broke so thats a good thing. And Rich so close mate to a 13 next time or should say next time a 10 Yeh that 260 on the bottle was impressive once he got a decent launch ![]() |
|||
![]() |
![]() ![]() |
![]() |
#7 | ||
Back on the road
Join Date: Dec 2004
Location: Wollongong, NSW
Posts: 3,205
|
![]() ![]() ![]() ![]() ![]()
__________________
------------------------------------------------------------------------- AU XR8 Ute 13.90 @ 100mph - http://www.aufalcon.com/xr8ute 5L Windsor, GT40X heads, Crane 2030, Pacey 4-1s, Lukey 3", 3.91:1, auto. Tuned by me w/Quarterhorse and BinaryEditor. Coming Soon: Ported lower intake, Tickford "Premium" Brakes, and a good wash. |
||
![]() |
![]() ![]() |
![]() |
#8 | ||
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,540
|
Congratulations Dave!! A 14.1 1/4 is awesome time. :lookedat: good work!!
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again ![]() |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
Banned
Join Date: Dec 2004
Location: Livin On The Edge
Posts: 7,354
|
Well done fella's, Wade rang me yesterday and told me you's were all heading out. I was going to come out but i got called back into work at 5.3o for anoher few hours so i couldn't get out there.
We need to oraginse a day and get everyone out there at once, that way when i go for a big launch with slicks like wade it'll make light work pushing it off the strip lol. Craig i heard you had a small drama the week before, who'd you use to get the car fixed. Was that cammed & Blown GT out again................ |
||
![]() |
![]() ![]() |
![]() |
#10 | ||
trying to get a leg over
![]() Join Date: Dec 2004
Location: Melbourne
Posts: 2,690
|
Well done guys, some good times there.
Hope to see some of you down for the AFF drag day, they should organize a meet up there one day, would love to come up and have a crack.
__________________
Cameron ------------------------------------------------------ |
||
![]() |
![]() ![]() |
![]() |
#11 | ||
Guest
Posts: n/a
|
Dave, you run with the tail gate on or off this time?
|
||
![]() ![]() |
![]() |
#12 | ||
.
Join Date: Dec 2004
Location: Bundoora
Posts: 7,199
|
Good going guys
Wade, very consistant with those 12.9's! Gotta love the way you deck that thing off the line and hear the tyres chirp |
||
![]() |
![]() ![]() |
![]() |
#13 | |||
Now a FG XR8 in Nitro
Join Date: Dec 2004
Location: Sydney
Posts: 550
|
Quote:
__________________
Nitro XR8 6 Speed Manual - SS Inductions Growler, Herrod Headers John Bowe exhaust 0-60kph 2.46 secs |
|||
![]() |
![]() ![]() |
![]() |
#14 | ||
Banned
Join Date: Dec 2004
Location: Livin On The Edge
Posts: 7,354
|
Thats not to bad Craig, bet the ride home took forever. Iv'e done it twice and the ride home is the worst part.
Make sure you have that guys number handy cause i got some spares now and im going to have another crack at a street tired 12 then i'm going to have a go with slicks. |
||
![]() |
![]() ![]() |
![]() |
#15 | |||
Regular Member
Join Date: Jun 2005
Posts: 374
|
Quote:
But I must say, Wade I cant remember the last time I have heard someone rip through the gears like that. (scant disreguard for your car dude) LOL. ![]() ![]()
__________________
XA Coupe 545cub N/A 10.17@136.70 BP ultimate. |
|||
![]() |
![]() ![]() |
![]() |
#16 | |||
Regular Member
Join Date: Jun 2005
Posts: 374
|
Quote:
Good to meet you Dave, winters coming. Good air..... See you out there again mate.
__________________
XA Coupe 545cub N/A 10.17@136.70 BP ultimate. |
|||
![]() |
![]() ![]() |
![]() |
#17 | |||
BOSS 5.4L Enthusiast
Join Date: Aug 2005
Posts: 21,904
|
Quote:
Factory or ? |
|||
![]() |
![]() ![]() |
![]() |
#18 | |||
Gota be happy with a Hump
![]() Join Date: Dec 2004
Location: Sydney
Posts: 476
|
Quote:
We gave him the forums address so maybe he will come on sometime and give us all a run down.
__________________
![]() ![]() 12.756 @ 107.16..........1.915 60' Genuine Unopened Time ![]() ![]() |
|||
![]() |
![]() ![]() |
![]() |
#19 | ||
RIP Craig - 13/11/08
![]() Join Date: Feb 2005
Location: Kilmore, 30 minutes from Heathcote Raceway
Posts: 3,571
|
Hope he gets on here i wanna find out if he has still got the 3 valve motor (If it was a V8 before) and if he wants to sell it?????
|
||
![]() |
![]() ![]() |
![]() |
#20 | |||
Solution Was Boost 4?, 6 & 8
Join Date: Dec 2004
Location: Melbourne
Posts: 23,624
|
Quote:
I wouldn't be to worried about mph either, we are seeing sometimes 2 to 7 mph difference between Heathcote and Calder, the ET is king. Chris are using a Hi Stall, if so what size is it. Good work all who had a crack and keep flying the blue flag.
__________________
[SIGPIC][/SIGPIC]
AUTOTECH TUNED EDELEBROCK CHARGED 2017 GT Mustang Plenty of RWKW |
|||
![]() |
![]() ![]() |
![]() |
#21 | ||
Gota be happy with a Hump
![]() Join Date: Dec 2004
Location: Sydney
Posts: 476
|
Craig...I will keep an eye out for him and ask him the question. He will be going back out when he gets some decent rubber.
Mark... The convertor is 2800 or 3000rpm (not exactly sure). My best 60' is 2.01 and on Wed night were mostly 2.04. I know I can do better with practise and the right technique. It's a bit disheartening when racing Wade with his 1.8 60's, he gets 1/2 to 1 car length in the blink of eye and thats where it stays. Apart from the launch our timeslip incrementals are pretty much the same. Raced Wade twice on Wed and lost both. (Boohoohoo, wipes tears from eyes.) First time he beat me by .305 and had .237 at 60'. Second time he beat me by .145 and had .154 lead at the 60'. So I am happy the way the car is going, I just have to somehow get rid of the cr@p launches of mine. I don't really want to go a bigger stall as it would be pretty bad around town. Might have to flick off the M/T ET's and steelies which are bl00dy heavy compared to Wade's setup, or even compared to the stockies. The other four races were against SS Commondoors and V8 Toranas and I beat them all. (Cheering, with dry eyes at last.)
__________________
![]() ![]() 12.756 @ 107.16..........1.915 60' Genuine Unopened Time ![]() ![]() |
||
![]() |
![]() ![]() |
![]() |
#22 | |||
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Working, chasing after my daughter and working
Posts: 3,407
|
Quote:
![]() |
|||
![]() |
![]() ![]() |
![]() |
#23 | |||
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Working, chasing after my daughter and working
Posts: 3,407
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#24 | |||
Regular Member
Join Date: Jun 2005
Posts: 374
|
Quote:
![]()
__________________
XA Coupe 545cub N/A 10.17@136.70 BP ultimate. |
|||
![]() |
![]() ![]() |
![]() |
#25 | |||
trying to get a leg over
![]() Join Date: Dec 2004
Location: Melbourne
Posts: 2,690
|
Quote:
I have tried every way with mine, hard on the brakes, and foot flat on the accelerator. Bringing the revs up to about 1500, then "flash stalling it" by just kicking it in the guts. And also, idling then kicking in the guts. I have had the best results by flash stalling it !!!
__________________
Cameron ------------------------------------------------------ |
|||
![]() |
![]() ![]() |
![]() |
#26 | |||
Tribal Elder
Join Date: Jul 2005
Location: Yarrambat
Posts: 2,278
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#27 | |||
Banned
Join Date: Dec 2004
Location: Livin On The Edge
Posts: 7,354
|
Quote:
|
|||
![]() |
![]() ![]() |