Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 05-01-2022, 01:43 PM   #1
neil3087
Starter Motor
 
Join Date: Nov 2013
Posts: 9
Default LZ Hatch Door Switch Removal

The hatch door switch has failed and feels like the button is stuck. The remote will still unlock the hatch and the reversing camera is still working.


After removing the hatch door interior trim there appears to be no access to this switch. It appears that this switch / camera assembly just clips into place without screws.



Is someone able to advise the method of removing this item?
neil3087 is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2022, 09:42 AM   #2
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 107,232
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default Re: LZ Hatch Door Switch Removal

It's probably not a lot of help but the only instructions in the WSM is the diagram below:

__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2022, 04:58 PM   #3
nobbystang
Regular Member
 
nobbystang's Avatar
 
Join Date: Mar 2006
Location: Newcastle, NSW
Posts: 352
Default Re: LZ Hatch Door Switch Removal

Quote:
Originally Posted by neil3087 View Post
The hatch door switch has failed and feels like the button is stuck. The remote will still unlock the hatch and the reversing camera is still working.


After removing the hatch door interior trim there appears to be no access to this switch. It appears that this switch / camera assembly just clips into place without screws.



Is someone able to advise the method of removing this item?
I've found searching for Mk2, 2.5, 3 etc has been helpful for troubleshooting my LV.

Hopefully this link has the info you're after. CLICK HERE
__________________
Current:
2016 Camry
1966 Mustang Coupe

Previous:
2011 SZ Territory Titanium
2008 Ford Edge AWD Limited
Silhouette BF XR6, ZF Auto
White EF GLi, XR look alike
VH Commodore
nobbystang is offline   Reply With Quote Multi-Quote with this Post
Old 06-01-2022, 08:29 PM   #4
neil3087
Starter Motor
 
Join Date: Nov 2013
Posts: 9
Default Re: LZ Hatch Door Switch Removal

Quote:
Originally Posted by nobbystang View Post
I've found searching for Mk2, 2.5, 3 etc has been helpful for troubleshooting my LV.

Hopefully this link has the info you're after. CLICK HERE

Thanks. I'll take the interior trim off again and have another look at this.
neil3087 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 10-01-2022, 01:20 PM   #5
neil3087
Starter Motor
 
Join Date: Nov 2013
Posts: 9
Default Re: LZ Hatch Door Switch Removal

To close off this thread.


I was able to see the right end retaining clip with the interior panel removed. Once pressure was applied the switch assembly was released and then all was required was the disconnection of the 2 wiring plugs.


Thanks.
neil3087 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 01:16 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL