|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-01-2022, 01:43 PM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2013
Posts: 9
|
The hatch door switch has failed and feels like the button is stuck. The remote will still unlock the hatch and the reversing camera is still working.
After removing the hatch door interior trim there appears to be no access to this switch. It appears that this switch / camera assembly just clips into place without screws. Is someone able to advise the method of removing this item? |
||
|
|
|
06-01-2022, 09:42 AM
|
#2 | ||
|
Chairman & Administrator
  
Join Date: Dec 2004
Location: 1975
Posts: 107,331
|
It's probably not a lot of help but the only instructions in the WSM is the diagram below:
__________________
 Observatio Facta Rotae
|
||
|
|
|
|
06-01-2022, 04:58 PM
|
#3 | |||
|
Regular Member
Join Date: Mar 2006
Location: Newcastle, NSW
Posts: 352
|
Quote:
Hopefully this link has the info you're after. CLICK HERE
__________________
Current: 2016 Camry 1966 Mustang Coupe Previous: 2011 SZ Territory Titanium 2008 Ford Edge AWD Limited Silhouette BF XR6, ZF Auto White EF GLi, XR look alike VH Commodore |
|||
|
|
|
|
06-01-2022, 08:29 PM
|
#4 | |||
|
Starter Motor
Join Date: Nov 2013
Posts: 9
|
Quote:
Thanks. I'll take the interior trim off again and have another look at this. |
|||
|
|
|
| This user likes this post: |
|
10-01-2022, 01:20 PM
|
#5 | ||
|
Starter Motor
Join Date: Nov 2013
Posts: 9
|
To close off this thread.
I was able to see the right end retaining clip with the interior panel removed. Once pressure was applied the switch assembly was released and then all was required was the disconnection of the 2 wiring plugs. Thanks. |
||
|
|
|
| This user likes this post: |
LZ Hatch Door Switch Removal
Linear Mode
